10 material differences · fewer than 12
Tractor oneDeutz (KHD) F1L514/2-N1956–1957No measured PTO figureTractor twoInternational Harvester D-2151962–1964No measured PTO figure
Which should you choose?
Read our verdict on the F1L514/2-N and the D-215 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | F1L514/2-N | D-215 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 15 hp | 15 hp | — |
| Engine declared | Deutz F1L 514 | INTERNATIONAL-HARVESTER DD-66 | differs |
| Displacement declared | 1.33 L | 1.09 L | +22% F1L514/2-N |
| Maximum torque declared | 51 lb·ft · 69 N·m | 38 lb·ft · 51 N·m | +35% F1L514/2-N |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 11.8 mph · 19 km/h | +5% F1L514/2-N |
| Hydraulics & hitch | |||
| Pump flow declared | — | 5.2 gpm · 19.5 L/min | — |
| Rear PTO speeds declared | 1220 | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 2,965 lb · 1,345 kg | 2,619 lb · 1,188 kg | +13% F1L514/2-N |
| Maximum permissible mass declared | 4,189 lb · 1,900 kg | 4,299 lb · 1,950 kg | — |
| Wheelbase declared | 62.4–65.7 in · 1,585–1,670 mm | 68.1 in · 1,730 mm | differs |
| Length declared | 98.8 in · 2,510 mm | 105.2 in · 2,672 mm | +6% D-215 |
| Width declared | 63.0 in · 1,600 mm | 62.2 in · 1,581 mm | — |
| Ground clearance declared | 15.7 in · 400 mm | 13.9 in · 352 mm | +14% F1L514/2-N |
| Turning radius, braked declared | 9.2 ft · 2.80 m | 8.0 ft · 2.45 m | +14% F1L514/2-N |
| Fuel tank declared | — | 28.5 qt · 27.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) F1L514/2-N sources
- Source: Traktorenlexikon, “Deutz F1L 514/2-N”
- Source: Traktorenlexikon, “Deutz F1L 514/50”
International Harvester D-215 sources
- Source: Traktorenlexikon, “McCormick D-215”
- Source: Traktorenlexikon, “McCormick DLD 2”