2 material differences · fewer than 12
Tractor oneDeutz (KHD) F1L514/2-N1956–1957No measured PTO figureTractor twoDeutz (KHD) F1L 514/511949–1956No measured PTO figure
Which should you choose?
Read our verdict on the F1L514/2-N and the F1L 514/51 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
2 material differences · 11 fields identical or within 5%, which is not counted as material
| Field | F1L514/2-N | F1L 514/51 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 15 hp | 15 hp | — |
| Engine declared | Deutz F1L 514 | KHD F1L 514 | differs |
| Displacement declared | 1.33 L | 1.33 L | — |
| Maximum torque declared | 51 lb·ft · 69 N·m | 51 lb·ft · 69 N·m | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 12.4 mph · 20 km/h | — |
| Clutch declared | — | Pedal operated dry single-plate clutch from Fichtel & Sachs | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 5.3 gpm · 20.0 L/min | — |
| Pressure declared | — | 1,991 psi · 137 bar | — |
| Rear PTO speeds declared | 1220 | 594 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 2,965 lb · 1,345 kg | 2,888 lb · 1,310 kg | — |
| Maximum permissible mass declared | 4,189 lb · 1,900 kg | 4,189 lb · 1,900 kg | — |
| Wheelbase declared | 62.4–65.7 in · 1,585–1,670 mm | 62.4–65.7 in · 1,585–1,670 mm | — |
| Length declared | 98.8 in · 2,510 mm | 98.8 in · 2,510 mm | — |
| Width declared | 63.0 in · 1,600 mm | 63.0 in · 1,600 mm | — |
| Ground clearance declared | 15.7 in · 400 mm | 15.7 in · 400 mm | — |
| Turning radius, braked declared | 9.2 ft · 2.80 m | 9.2 ft · 2.80 m | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) F1L514/2-N sources
- Source: Traktorenlexikon, “Deutz F1L 514/2-N”
- Source: Traktorenlexikon, “Deutz F1L 514/50”
Deutz (KHD) F1L 514/51 sources
- Source: Traktorenlexikon, “Deutz F1L 514/51”