Deutz (KHD) D 9005 or Hürlimann D-310 (A)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the D 9005 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the D-310 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz (KHD) D 9005 and Hürlimann D-310 (A), with the call on each
QuestionD 9005D-310 (A)Call
Which puts more power through the PTO shaft?62.2 kW (83.4 hp)Traktorenlexikon, “Deutz D 9005”62.5 kW (83.8 hp)Traktorenlexikon, “Hürlimann D 310”Not comparableNot comparable on power at the PTO shaft: the D 9005 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the D-310 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the D 9005 and the D-310 (A).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the D 9005 and the D-310 (A).
Which pumps more oil for implements?34.0 L/min (9.0 gpm)Traktorenlexikon, “Deutz D 9005”36.0 L/min (9.5 gpm)Traktorenlexikon, “Hürlimann D 310”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?—2,450 kg (5,401 lb)Traktorenlexikon, “Hürlimann D 310”No figureNo call on three-point lift: no figure on record for the D 9005.
Which is heavier, for traction?3,675 kg (8,102 lb)Traktorenlexikon, “Deutz D 9005”3,030 kg (6,680 lb)Traktorenlexikon, “Hürlimann D 310”Ahead (a fact, not an advantage)The Deutz D 9005 is 21% heavier (645 kg / 1,422 lb) than the Hürlimann D-310 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?6,500 kg (14,330 lb)Traktorenlexikon, “Deutz D 9005”—No figureNo call on maximum permissible mass: no figure on record for the D-310 (A).
Which has the wider choice of gears?12 to 16Traktorenlexikon, “Deutz D 9005”10 to 12Traktorenlexikon, “Hürlimann D 310”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the D 9005 and the D-310 (A).
Which is faster on the road?27 km/h (16.8 mph)Traktorenlexikon, “Deutz D 9005”25 km/h (15.5 mph)Traktorenlexikon, “Hürlimann D 310”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz D 9005”540 rpm / 1000 rpmTraktorenlexikon, “Hürlimann D 310”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz D 9005”—No figureNo call on PTO independence: not stated for the D-310 (A).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Deutz D 9005”Two-wheel or four-wheel driveTraktorenlexikon, “Hürlimann D 310”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?19671973–1975Ahead (a fact, not an advantage)The Hürlimann D-310 (A) is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz D 9005 is 21% heavier (645 kg / 1,422 lb) than the Hürlimann D-310 (A) (both unladen weight, as stated by the source).
  • The Hürlimann D-310 (A) is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the D 9005 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the D-310 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources