7 material differences · fewer than 12
Tractor oneDeutz (KHD) D 80061970–1978No measured PTO figureTractor twoSchlüter S 900 (S 900 V)1964–1966No measured PTO figure
Which should you choose?
Read our verdict on the D 8006 and the S 900 (S 900 V) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | D 8006 | S 900 (S 900 V) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 78.6 hp | 78.6 hp | — |
| Engine declared | KHD F6L 912 | Schlüter SD 105 W6 | differs |
| Displacement declared | 5.65 L | 6.49 L | +15% S 900 (S 900 V) |
| Maximum torque declared | 225 lb·ft · 305 N·m | 224 lb·ft · 304 N·m | — |
| Transmission | |||
| Top speed declared | 18.0 mph · 29.0 km/h | 12.4–17.4 mph · 20–28 km/h | differs |
| Hydraulics & hitch | |||
| Pressure declared | 3,046 psi · 210 bar | — | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 590/950 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,636 lb · 3,010 kg | 8,378–9,149 lb · 3,800–4,150 kg | differs |
| Maximum permissible mass declared | 12,787 lb · 5,800 kg | — | — |
| Wheelbase declared | 100.4 in · 2,550 mm | 103.4 in · 2,627 mm | — |
| Length declared | 163.4 in · 4,150 mm | 173.6 in · 4,410 mm | +6% S 900 (S 900 V) |
| Width declared | 78.1 in · 1,985 mm | 77.6 in · 1,970 mm | — |
| Ground clearance declared | 20.5 in · 520 mm | — | — |
| Turning radius, braked declared | 13.5 ft · 4.10 m | 13.8 ft · 4.20 m | — |
| Fuel tank declared | 126.8 qt · 120 L | 105.7 qt · 100 L | +20% D 8006 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 8006 sources
- Source: Traktorenlexikon, “Deutz D 8006”
- Source: Traktorenlexikon, “Deutz-Fahr DX 110”
Schlüter S 900 (S 900 V) sources
- Source: Traktorenlexikon, “Schlüter S 900 / 900 V”