10 material differences · fewer than 12
Tractor oneDeutz (KHD) D 80051965–1967No measured PTO figureTractor twoInternational Harvester 8841979–1981No measured PTO figure
Which should you choose?
Read our verdict on the D 8005 and the 884 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | D 8005 | 884 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 74 hp | 78.9 hp | +7% 884 |
| Engine declared | KHD F6L 812 SF | INTERNATIONAL-HARVESTER DT-268 | differs |
| Displacement declared | 5.10 L | 4.40 L | +16% D 8005 |
| Maximum torque declared | 197 lb·ft · 267 N·m | 201 lb·ft · 272 N·m | — |
| Transmission | |||
| Top speed declared | 16.5 mph · 26.5 km/h | 15.5 mph · 25 km/h | +6% D 8005 |
| Clutch declared | Dry double clutch operated by two-stage pedal | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 11.8 gpm · 44.6 L/min | — |
| Pressure declared | — | 2,698 psi · 186 bar | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,135 lb · 3,690 kg | 5,787 lb · 2,625 kg | +41% D 8005 |
| Wheelbase declared | 96.5 in · 2,450 mm | 88.8 in · 2,255 mm | +9% D 8005 |
| Length declared | 160.0 in · 4,065 mm | 146.5 in · 3,720 mm | +9% D 8005 |
| Width declared | 77.4 in · 1,965 mm | 78.7 in · 1,998 mm | — |
| Ground clearance declared | 23.6 in · 600 mm | 12.2 in · 310 mm | +94% D 8005 |
| Turning radius, braked declared | 13.0 ft · 3.95 m | 11.6 ft · 3.55 m | +11% D 8005 |
| Fuel tank declared | 124.7 qt · 118 L | 81.4 qt · 77.0 L | +53% D 8005 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 8005 sources
- Source: Traktorenlexikon, “Deutz D 8005”
International Harvester 884 sources
- Source: Traktorenlexikon, “IHC 884”