9 material differences · fewer than 12
Tractor oneDeutz (KHD) D 80051965–1967No measured PTO figureTractor twoInternational Harvester 7061963–1967No measured PTO figure
Which should you choose?
Read our verdict on the D 8005 and the 706 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | D 8005 | 706 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 74 hp | 66.1 hp | +12% D 8005 |
| Engine declared | KHD F6L 812 SF | INTERNATIONAL HARVESTER C-263 or C-291 | differs |
| Displacement declared | 5.10 L | — | — |
| Maximum torque declared | 197 lb·ft · 267 N·m | — | — |
| Transmission | |||
| Top speed declared | 16.5 mph · 26.5 km/h | 18.6 mph · 30 km/h | +13% 706 |
| Clutch declared | Dry double clutch operated by two-stage pedal | — | — |
| Hydraulics & hitch | |||
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,135 lb · 3,690 kg | 8,285 lb · 3,758 kg | — |
| Wheelbase declared | 96.5 in · 2,450 mm | 87.0 in · 2,210 mm | +11% D 8005 |
| Length declared | 160.0 in · 4,065 mm | 157.0 in · 3,988 mm | — |
| Width declared | 77.4 in · 1,965 mm | 92.0–110.0 in · 2,337–2,794 mm | differs |
| Height, over the steering wheel declared | 73.8 in · 1,875 mm | 80.0 in · 2,032 mm | +8% 706 |
| Ground clearance declared | 23.6 in · 600 mm | 17.0 in · 432 mm | +39% D 8005 |
| Turning radius, braked declared | 13.0 ft · 3.95 m | 10.7 ft · 3.25 m | +22% D 8005 |
| Fuel tank declared | 124.7 qt · 118 L | 132.1 qt · 125.0 L | +6% 706 |
Deutz (KHD) D 8005 sources
Source
- Source: Traktorenlexikon, “Deutz D 8005”
International Harvester 706 sources
Source
- Source: Traktorenlexikon, “IHC 706”