Deutz (KHD) D 7206 or Lamborghini R-475 (DT)?

Which should you choose?

On performance, every comparable figure that differs favours the Deutz D 7206: hydraulic flow. It is also ahead on top speed.

  • The Deutz D 7206 suits loader and hydraulic implement work better on this data: 12% (3.0 L/min / 0.8 gpm) more hydraulic flow.
  • The Deutz D 7206 suits road haulage better on this data: 10% (2.6 km/h / 1.6 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz (KHD) D 7206 and Lamborghini R-475 (DT), with the call on each
QuestionD 7206R-475 (DT)Call
Which puts more power through the PTO shaft?49 kW (66 hp)Traktorenlexikon, “Deutz D 7206”49.4 kW (66.2 hp)Traktorenlexikon, “Lamborghini R 475 (DT)”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the D 7206 and the R-475 (DT).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the D 7206 and the R-475 (DT).
Which pumps more oil for implements?27.2 L/min (7.2 gpm)Traktorenlexikon, “Deutz D 7206”24.2 L/min (6.4 gpm)Traktorenlexikon, “Lamborghini R 475 (DT)”AheadThe Deutz D 7206 has 12% more hydraulic flow (3.0 L/min / 0.8 gpm) than the Lamborghini R-475 (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,600 kg (5,732 lb)Traktorenlexikon, “Deutz D 7206”2,734 kg (6,027 lb)Traktorenlexikon, “Lamborghini R 475 (DT)”Not comparableNot comparable on three-point lift: the D 7206: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Deutz D 7206”); the R-475 (DT): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Lamborghini R 475 (DT)”) — not the same quantity, basis and condition.
Which is heavier, for traction?2,600 kg (5,732 lb)Traktorenlexikon, “Deutz D 7206”2,742 kg (6,045 lb)Traktorenlexikon, “Lamborghini R 475 (DT)”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?5,000 kg (11,023 lb)Traktorenlexikon, “Deutz D 7206”No figureNo call on maximum permissible mass: no figure on record for the R-475 (DT).
Which has the wider choice of gears?12Traktorenlexikon, “Deutz D 7206”12Traktorenlexikon, “Lamborghini R 475 (DT)”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the D 7206 and the R-475 (DT).
Which is faster on the road?27.6 km/h (17.1 mph)Traktorenlexikon, “Deutz D 7206”25 km/h (15.5 mph)Traktorenlexikon, “Lamborghini R 475 (DT)”AheadThe Deutz D 7206 has 10% more top speed (2.6 km/h / 1.6 mph) than the Lamborghini R-475 (DT) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz D 7206”540/1000 rpmTraktorenlexikon, “Lamborghini R 475 (DT)”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz D 7206”independentTraktorenlexikon, “Lamborghini R 475 (DT)”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Deutz D 7206”Two-wheel or four-wheel driveTraktorenlexikon, “Lamborghini R 475 (DT)”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1974–19811971–1973EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz D 7206 has 12% more hydraulic flow (3.0 L/min / 0.8 gpm) than the Lamborghini R-475 (DT) (both pump flow, as stated by the source).
  • The Deutz D 7206 has 10% more top speed (2.6 km/h / 1.6 mph) than the Lamborghini R-475 (DT) (both top speed forward, as stated by the source).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on three-point lift: the D 7206: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Deutz D 7206”); the R-475 (DT): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Lamborghini R 475 (DT)”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources