9 material differences · fewer than 12
Tractor oneDeutz (KHD) D 70061970–1974No measured PTO figureTractor twoFendt Favorit 3s1967–1970No measured PTO figure
Which should you choose?
Read our verdict on the D 7006 and the Favorit 3s → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | D 7006 | Favorit 3s | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 66 hp | 60.9 hp | +8% D 7006 |
| Engine declared | KHD F4L 912 | MWM D 225.4 | differs |
| Displacement declared | 3.77 L | 3.38 L | +11% D 7006 |
| Maximum torque declared | 171 lb·ft · 232 N·m | 157 lb·ft · 213 N·m | +9% D 7006 |
| Transmission | |||
| Top speed declared | 17.1 mph · 27.6 km/h | 18.6 mph · 30 km/h | +9% Favorit 3s |
| Clutch declared | Independent dry Walterscheid double clutch | Tornado duplex clutch by Fichtel & Sachs | differs |
| Hydraulics & hitch | |||
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,063 lb · 2,750 kg | 5,986 lb · 2,715 kg | — |
| Maximum permissible mass declared | 11,023 lb · 5,000 kg | 9,921 lb · 4,500 kg | +11% D 7006 |
| Wheelbase declared | 94.9 in · 2,410 mm | 89.0 in · 2,261 mm | +7% D 7006 |
| Length declared | 154.9 in · 3,935 mm | 151.4 in · 3,845 mm | — |
| Width declared | 77.0 in · 1,955 mm | 73.5 in · 1,868 mm | — |
| Ground clearance declared | 19.9 in · 505 mm | 16.5 in · 420 mm | +20% D 7006 |
| Turning radius, braked declared | 13.0 ft · 3.96 m | 12.1 ft · 3.70 m | +7% D 7006 |
| Fuel tank declared | 97.2 qt · 92 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 7006 sources
- Source: Traktorenlexikon, “Deutz D 7006”
- Source: Traktorenlexikon, “Deutz D 6006”
Fendt Favorit 3s sources
- Source: Traktorenlexikon, “Fendt Favorit 3 S/SA”