7 material differences · fewer than 12
Tractor oneDeutz (KHD) D 55061968–1974No measured PTO figureTractor twoZETOR Super 501960–1968No measured PTO figure
Which should you choose?
Read our verdict on the D 5506 and the Super 50 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | D 5506 | Super 50 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 51.1 hp | 49.3 hp | — |
| Engine declared | KHD F4L 912 | — | — |
| Displacement declared | 3.77 L | — | — |
| Maximum torque declared | 135 lb·ft · 182 N·m | 177 lb·ft · 240 N·m | +32% Super 50 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% D 5506 |
| Clutch declared | — | pedal-operated dry double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 3.3 gpm · 12.5 L/min | — |
| Pressure declared | 2,538 psi · 175 bar | 1,707 psi · 118 bar | +48% D 5506 |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,575 lb · 2,075 kg | 6,041 lb · 2,740 kg | +32% Super 50 |
| Wheelbase declared | 83.7 in · 2,125 mm | 86.2 in · 2,190 mm | — |
| Length declared | 141.7 in · 3,600 mm | 132.3 in · 3,360 mm | +7% D 5506 |
| Width declared | 74.0 in · 1,880 mm | 73.8–86.0 in · 1,875–2,185 mm | differs |
| Ground clearance declared | 17.3 in · 440 mm | 17.7 in · 450 mm | — |
| Turning radius, braked declared | 11.3 ft · 3.45 m | 10.0 ft · 3.05 m | +13% D 5506 |
| Fuel tank declared | 74.0 qt · 70 L | 71.9 qt · 68.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 5506 sources
- Source: Traktorenlexikon, “Deutz D 5506”
- Source: Traktorenlexikon, “Deutz D 6006”
ZETOR Super 50 sources
- Source: Wikipedia (pl): Zetor Super 50 (open data)
- Source: Traktorenlexikon, “Zetor 50 Super”