Deutz (KHD) D 5506 or Hürlimann H-355 (A)?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level. On features, the Hürlimann H-355 (A) is ahead on forward gears; the Deutz D 5506 is ahead on top speed.

  • The Deutz D 5506 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz (KHD) D 5506 and Hürlimann H-355 (A), with the call on each
QuestionD 5506H-355 (A)Call
Which puts more power through the PTO shaft?35.6 kW (47.7 hp)Traktorenlexikon, “Deutz D 5506”35.6 kW (47.7 hp)Traktorenlexikon, “Hürlimann H 355”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the D 5506 and the H-355 (A).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the D 5506 and the H-355 (A).
Which pumps more oil for implements?——No figureNo call on hydraulic flow: no figure on record for the D 5506 and the H-355 (A).
Which lifts more on the three-point hitch?1,700 kg (3,748 lb)Traktorenlexikon, “Deutz D 5506”1,672 kg (3,687 lb)Traktorenlexikon, “Hürlimann H 355”Not comparableNot comparable on three-point lift: the D 5506: lift at an unstated point, as stated by the source (Traktorenlexikon, “Deutz D 5506”); the H-355 (A): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann H 355”) — not the same quantity, basis and condition.
Which is heavier, for traction?2,075 kg (4,575 lb)Traktorenlexikon, “Deutz D 5506”1,980 kg (4,365 lb)Traktorenlexikon, “Hürlimann H 355”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the D 5506 and the H-355 (A).
Which has the wider choice of gears?8Traktorenlexikon, “Deutz D 5506”12Traktorenlexikon, “Hürlimann H 355”AheadThe Hürlimann H-355 (A) has 50% more forward gears (4 gears) than the Deutz D 5506 (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the D 5506 and the H-355 (A).
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Deutz D 5506”25 km/h (15.5 mph)Traktorenlexikon, “Hürlimann H 355”AheadThe Deutz D 5506 has 20% more top speed (5.0 km/h / 3.1 mph) than the Hürlimann H-355 (A) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Deutz D 5506”540 rpmTraktorenlexikon, “Hürlimann H 355”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz D 5506”—No figureNo call on PTO independence: not stated for the H-355 (A).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Deutz D 5506”Two-wheel or four-wheel driveTraktorenlexikon, “Hürlimann H 355”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1968–19741982–1986Ahead (a fact, not an advantage)The Hürlimann H-355 (A) is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Hürlimann H-355 (A) has 50% more forward gears (4 gears) than the Deutz D 5506 (both forward gears, as stated by the source).
  • The Deutz D 5506 has 20% more top speed (5.0 km/h / 3.1 mph) than the Hürlimann H-355 (A) (both top speed forward, as stated by the source).
  • The Hürlimann H-355 (A) is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on three-point lift: the D 5506: lift at an unstated point, as stated by the source (Traktorenlexikon, “Deutz D 5506”); the H-355 (A): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann H 355”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources