6 material differences · fewer than 12
Tractor oneDeutz (KHD) D 50061968–1974No measured PTO figureTractor twoPorsche-Diesel Master 4081958–1960No measured PTO figure
Which should you choose?
Read our verdict on the D 5006 and the Master 408 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | D 5006 | Master 408 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44 hp | 49.1 hp | +11% Master 408 |
| Engine declared | KHD F3L 912 | Porsche-Diesel F 408 | differs |
| Displacement declared | 2.83 L | 3.29 L | +16% Master 408 |
| Maximum torque declared | 132 lb·ft · 179 N·m | 132 lb·ft · 178 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 12.1 mph · 19.5 km/h | +28% D 5006 |
| Clutch declared | — | Hydraulic Voith fluid coupling and Fichtel & Sachs double dry clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 6.6 gpm · 25.0 L/min | — |
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Rear PTO speeds declared | — | 540 | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,398 lb · 1,995 kg | 5,401 lb · 2,450 kg | +23% Master 408 |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | — | — |
| Wheelbase declared | 78.7 in · 2,000 mm | 97.0 in · 2,465 mm | +23% Master 408 |
| Length declared | 136.6 in · 3,470 mm | 143.7 in · 3,650 mm | — |
| Width declared | 66.3 in · 1,685 mm | 73.4 in · 1,865 mm | +11% Master 408 |
| Ground clearance declared | 16.9 in · 430 mm | 17.2 in · 437 mm | — |
| Turning radius, braked declared | 10.5 ft · 3.20 m | — | — |
| Fuel tank declared | — | 48.6 qt · 46 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 5006 sources
- Source: Traktorenlexikon, “Deutz D 5006”
- Source: Traktorenlexikon, “Deutz D 4006 P”
Porsche-Diesel Master 408 sources
- Source: Traktorenlexikon, “Porsche-Diesel Master N408”