Deutz (KHD) D 5006 V/VA or Güldner G 45 A (S)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the D 5006 V/VA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the G 45 A (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Güldner G 45 A (S) suits loader and hydraulic implement work better on this data: 21% (330 kg / 728 lb) more three-point lift.
- The Deutz D 5006 V/VA suits road haulage better on this data: 25% (5.0 km/h / 3.1 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | D 5006 V/VA | G 45 A (S) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 32.9 kW (44.1 hp)Traktorenlexikon, “Deutz D 5006 V/VA” | 32.9 kW (44.1 hp)Traktorenlexikon, “Güldner G 45A” | Not comparableNot comparable on power at the PTO shaft: the D 5006 V/VA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the G 45 A (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the D 5006 V/VA and the G 45 A (S). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the D 5006 V/VA and the G 45 A (S). |
| Which pumps more oil for implements? | — | — | No figureNo call on hydraulic flow: no figure on record for the D 5006 V/VA and the G 45 A (S). |
| Which lifts more on the three-point hitch? | 1,580 kg (3,483 lb)Traktorenlexikon, “Deutz D 5006 V/VA” | 1,910 kg (4,211 lb)Traktorenlexikon, “Güldner G 45A” | AheadThe Güldner G 45 A (S) has 21% more lift (330 kg / 728 lb) than the Deutz D 5006 V/VA (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 1,540 kg (3,395 lb)Traktorenlexikon, “Deutz D 5006 V/VA” | 2,405 kg (5,302 lb)Traktorenlexikon, “Güldner G 45A” | Ahead (a fact, not an advantage)The Güldner G 45 A (S) is 56% heavier (865 kg / 1,907 lb) than the Deutz D 5006 V/VA (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | 4,000 kg (8,818 lb)Traktorenlexikon, “Güldner G 45A” | No figureNo call on maximum permissible mass: no figure on record for the D 5006 V/VA. |
| Which has the wider choice of gears? | 12Traktorenlexikon, “Deutz D 5006 V/VA” | 8Traktorenlexikon, “Güldner G 45A” | AheadThe Deutz D 5006 V/VA has 50% more forward gears (4 gears) than the Güldner G 45 A (S) (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the D 5006 V/VA and the G 45 A (S). |
| Which is faster on the road? | 25.0 km/h (15.5 mph)Traktorenlexikon, “Deutz D 5006 V/VA” | 20 km/h (12.4 mph)Traktorenlexikon, “Güldner G 45A” | AheadThe Deutz D 5006 V/VA has 25% more top speed (5.0 km/h / 3.1 mph) than the Güldner G 45 A (S) (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Deutz D 5006 V/VA” | 540/1000 rpmTraktorenlexikon, “Güldner G 45A” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz D 5006 V/VA” | independentTraktorenlexikon, “Güldner G 45A” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “Deutz D 5006 V/VA” | 4WDTraktorenlexikon, “Güldner G 45A” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1974– | 1965–1969 | Ahead (a fact, not an advantage)The Deutz D 5006 V/VA is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Güldner G 45 A (S) has 21% more lift (330 kg / 728 lb) than the Deutz D 5006 V/VA (both lift at the hitch ends, as stated by the source).
- The Güldner G 45 A (S) is 56% heavier (865 kg / 1,907 lb) than the Deutz D 5006 V/VA (both unladen weight, as stated by the source).
- The Deutz D 5006 V/VA has 50% more forward gears (4 gears) than the Güldner G 45 A (S) (both forward gears, as stated by the source).
- The Deutz D 5006 V/VA has 25% more top speed (5.0 km/h / 3.1 mph) than the Güldner G 45 A (S) (both top speed forward, as stated by the source).
- The Deutz D 5006 V/VA is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the D 5006 V/VA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the G 45 A (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources