11 material differences · fewer than 12
Tractor oneDeutz (KHD) D 40051965–1967No measured PTO figureTractor twoEicher 40381978–1982No measured PTO figure
Which should you choose?
Read our verdict on the D 4005 and the 4038 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | D 4005 | 4038 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 34.3 hp | 37.3 hp | +9% 4038 |
| Engine declared | KHD F3L 812/S | Perkins AD 3.152 | differs |
| Displacement declared | 2.55 L | 2.50 L | — |
| Maximum torque declared | 101 lb·ft · 136 N·m | 114 lb·ft · 155 N·m | +14% 4038 |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 15.5 mph · 25 km/h | +25% 4038 |
| Clutch declared | — | Dual dry clutch | — |
| Hydraulics & hitch | |||
| Pressure declared | 2,538 psi · 175 bar | 2,538 psi · 175 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,924 lb · 1,780 kg | 4,784 lb · 2,170 kg | +22% 4038 |
| Maximum permissible mass declared | 7,055 lb · 3,200 kg | 6,614 lb · 3,000 kg | +7% D 4005 |
| Wheelbase declared | 78.5 in · 1,995 mm | 83.2 in · 2,113 mm | +6% 4038 |
| Length declared | 135.0 in · 3,430 mm | 137.2 in · 3,485 mm | — |
| Width declared | 59.6 in · 1,515 mm | 63.4 in · 1,610 mm | +6% 4038 |
| Ground clearance declared | 16.3 in · 415 mm | 14.6 in · 370 mm | +12% D 4005 |
| Turning radius, braked declared | 10.7 ft · 3.25 m | 11.4 ft · 3.48 m | +7% 4038 |
| Fuel tank declared | 67.6 qt · 64 L | 89.8 qt · 85 L | +33% 4038 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 4005 sources
- Source: Traktorenlexikon, “Deutz D 4005”
- Source: Traktorenlexikon, “Kramer KL 350”
Eicher 4038 sources
- Source: Traktorenlexikon, “Eicher 4038”
- Source: Traktorenlexikon, “Massey Ferguson MF 148”