Deutz (KHD) D 3006 P or Dexheimer Hinterrad 222 (MWM D302-2)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the D 3006 P has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Hinterrad 222 (MWM D302-2) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Deutz D 3006P suits road haulage better on this data: 22% (4.4 km/h / 2.7 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz (KHD) D 3006 P and Dexheimer Hinterrad 222 (MWM D302-2), with the call on each
QuestionD 3006 PHinterrad 222 (MWM D302-2)Call
Which puts more power through the PTO shaft?22 kW (30 hp)Traktorenlexikon, “Deutz D 3006 P”21 kW (28 hp)Traktorenlexikon, “Dexheimer HINTERRAD 222 (MWM D302-2)”Not comparableNot comparable on power at the PTO shaft: the D 3006 P has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Hinterrad 222 (MWM D302-2) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the D 3006 P and the Hinterrad 222 (MWM D302-2).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the D 3006 P and the Hinterrad 222 (MWM D302-2).
Which pumps more oil for implements?——No figureNo call on hydraulic flow: no figure on record for the D 3006 P and the Hinterrad 222 (MWM D302-2).
Which lifts more on the three-point hitch?1,490 kg (3,285 lb)Traktorenlexikon, “Deutz D 3006 P”2,200 kg (4,850 lb)Traktorenlexikon, “Dexheimer HINTERRAD 222 (MWM D302-2)”EvenNo call on three-point lift: the sources do not state where the lift was measured, so the difference is not a reliable call.
Which is heavier, for traction?1,655 kg (3,649 lb)Traktorenlexikon, “Deutz D 3006 P”1,100 kg (2,425 lb)Traktorenlexikon, “Dexheimer HINTERRAD 222 (MWM D302-2)”Ahead (a fact, not an advantage)The Deutz D 3006P is 50% heavier (555 kg / 1,224 lb) than the Dexheimer Hinterrad 222 (MWM D302-2) (both unladen weight, as stated by the source).
Which may carry more ballast and load?3,000 kg (6,614 lb)Traktorenlexikon, “Deutz D 3006 P”2,750 kg (6,063 lb)Traktorenlexikon, “Dexheimer HINTERRAD 222 (MWM D302-2)”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?8Traktorenlexikon, “Deutz D 3006 P”6Traktorenlexikon, “Dexheimer HINTERRAD 222 (MWM D302-2)”AheadThe Deutz D 3006P has 33% more forward gears (2 gears) than the Dexheimer Hinterrad 222 (MWM D302-2) (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the D 3006 P and the Hinterrad 222 (MWM D302-2).
Which is faster on the road?24.4 km/h (15.2 mph)Traktorenlexikon, “Deutz D 3006 P”20 km/h (12.4 mph)Traktorenlexikon, “Dexheimer HINTERRAD 222 (MWM D302-2)”AheadThe Deutz D 3006P has 22% more top speed (4.4 km/h / 2.7 mph) than the Dexheimer Hinterrad 222 (MWM D302-2) (both top speed forward, as stated by the source).
Which offers more PTO speeds?1285Traktorenlexikon, “Deutz D 3006 P”540 rpmTraktorenlexikon, “Dexheimer HINTERRAD 222 (MWM D302-2)”No figureNo call on PTO speeds: no standard PTO speed stated for the D 3006 P.
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz D 3006 P”—No figureNo call on PTO independence: not stated for the Hinterrad 222 (MWM D302-2).
Which drives on both axles?2WDTraktorenlexikon, “Deutz D 3006 P”4WDTraktorenlexikon, “Dexheimer HINTERRAD 222 (MWM D302-2)”AheadThe Dexheimer Hinterrad 222 (MWM D302-2) is available with four-wheel drive; the Deutz D 3006P is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1969–19721980–1985Ahead (a fact, not an advantage)The Dexheimer Hinterrad 222 (MWM D302-2) is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz D 3006P is 50% heavier (555 kg / 1,224 lb) than the Dexheimer Hinterrad 222 (MWM D302-2) (both unladen weight, as stated by the source).
  • The Deutz D 3006P has 33% more forward gears (2 gears) than the Dexheimer Hinterrad 222 (MWM D302-2) (both forward gears, as stated by the source).
  • The Deutz D 3006P has 22% more top speed (4.4 km/h / 2.7 mph) than the Dexheimer Hinterrad 222 (MWM D302-2) (both top speed forward, as stated by the source).
  • The Dexheimer Hinterrad 222 (MWM D302-2) is available with four-wheel drive; the Deutz D 3006P is two-wheel drive (as stated by the sources).
  • The Dexheimer Hinterrad 222 (MWM D302-2) is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.
  • No call on three-point lift: the sources do not state where the lift was measured, so the difference is not a reliable call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Not comparable on power at the PTO shaft: the D 3006 P has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Hinterrad 222 (MWM D302-2) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range, PTO speeds and PTO independence.

← Every figure for both machines, side by side, with sources