10 material differences · fewer than 12
Tractor oneDeutz (KHD) D 13006 A1972–1978No measured PTO figureTractor twoJ.I. Case 20901978–1983No measured PTO figure
Which should you choose?
Read our verdict on the D 13006 A and the 2090 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | D 13006 A | 2090 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 118 hp | 118.4 hp | — |
| Engine declared | KHD BF6L 912 | CASE 504 BD | differs |
| Displacement declared | 5.65 L | 8.26 L | +46% 2090 |
| Maximum torque declared | 321 lb·ft · 435 N·m | 318 lb·ft · 431 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | Independent, dry Walterscheidt double clutch | Pedal-operated wet disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 21.0 gpm · 79.5 L/min | — |
| Pressure declared | 2,987–3,698 psi · 206–255 bar | — | — |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,494 lb · 4,760 kg | 11,909–12,031 lb · 5,402–5,457 kg | differs |
| Wheelbase declared | 100.4 in · 2,550 mm | 104.0 in · 2,642 mm | — |
| Length declared | 167.3 in · 4,250 mm | 161.8 in · 4,110 mm | — |
| Width declared | 88.6 in · 2,250 mm | 79.1–103.1 in · 2,010–2,620 mm | differs |
| Ground clearance declared | 16.7 in · 425 mm | 21.0 in · 533 mm | +25% 2090 |
| Turning radius, braked declared | 16.4 ft · 5.00 m | 11.8 ft · 3.61 m | +39% D 13006 A |
| Fuel tank declared | 169.1 qt · 160 L | 259.9 qt · 246.0 L | +54% 2090 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 13006 A sources
- Source: Traktorenlexikon, “Deutz D 13006”
J.I. Case 2090 sources
- Source: Traktorenlexikon, “Case 2090”