10 material differences · fewer than 12
Tractor oneDeutz (KHD) D 13006 A1972–1978No measured PTO figureTractor twoFord 8600 (A)1972–1976No measured PTO figure
Which should you choose?
Read our verdict on the D 13006 A and the 8600 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | D 13006 A | 8600 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 118 hp | 116.4 hp | — |
| Engine declared | KHD BF6L 912 | Ford 401 DF | differs |
| Displacement declared | 5.65 L | 6.58 L | +16% 8600 (A) |
| Maximum torque declared | 321 lb·ft · 435 N·m | 296 lb·ft · 401 N·m | +8% D 13006 A |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | Independent, dry Walterscheidt double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 12.0 gpm · 45.4 L/min | — |
| Pressure declared | 2,987–3,698 psi · 206–255 bar | — | — |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,494 lb · 4,760 kg | 13,228 lb · 6,000 kg | +26% 8600 (A) |
| Wheelbase declared | 100.4 in · 2,550 mm | 91.5 in · 2,324 mm | +10% D 13006 A |
| Length declared | 167.3 in · 4,250 mm | 148.3 in · 3,767 mm | +13% D 13006 A |
| Width declared | 88.6 in · 2,250 mm | 85.0 in · 2,159 mm | — |
| Ground clearance declared | 16.7 in · 425 mm | 25.2 in · 640 mm | +51% 8600 (A) |
| Turning radius, braked declared | 16.4 ft · 5.00 m | 11.0 ft · 3.35 m | +49% D 13006 A |
| Fuel tank declared | 169.1 qt · 160 L | 172.2 qt · 163.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 13006 A sources
- Source: Traktorenlexikon, “Deutz D 13006”
Ford 8600 (A) sources
- Source: Traktorenlexikon, “Ford 8600”