7 material differences · fewer than 12
Tractor oneDeutz (KHD) D 13006 A1972–1978No measured PTO figureTractor twoFendt Favorit 612 SA1974No measured PTO figure
Which should you choose?
Read our verdict on the D 13006 A and the Favorit 612 SA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | D 13006 A | Favorit 612 SA | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 118 hp | 118 hp | — |
| Engine declared | KHD BF6L 912 | MWM D 226-6 | differs |
| Displacement declared | 5.65 L | 6.23 L | +10% Favorit 612 SA |
| Maximum torque declared | 321 lb·ft · 435 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Independent, dry Walterscheidt double clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Constant flow | — |
| Pressure declared | 2,987–3,698 psi · 206–255 bar | — | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 10,494 lb · 4,760 kg | 8,885 lb · 4,030 kg | +18% D 13006 A |
| Maximum permissible mass declared | — | 14,330 lb · 6,500 kg | — |
| Wheelbase declared | 100.4 in · 2,550 mm | 106.1 in · 2,696 mm | +6% Favorit 612 SA |
| Length declared | 167.3 in · 4,250 mm | 172.5 in · 4,382 mm | — |
| Width declared | 88.6 in · 2,250 mm | 84.8 in · 2,154 mm | — |
| Ground clearance declared | 16.7 in · 425 mm | 18.1 in · 460 mm | +8% Favorit 612 SA |
| Turning radius, braked declared | 16.4 ft · 5.00 m | 15.4 ft · 4.70 m | +6% D 13006 A |
| Fuel tank declared | 169.1 qt · 160 L | 137.4 qt · 130 L | +23% D 13006 A |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 13006 A sources
- Source: Traktorenlexikon, “Deutz D 13006”
Fendt Favorit 612 SA sources
- Source: Traktorenlexikon, “Fendt Favorit 612 SA”
- Source: Traktorenlexikon, “Fendt Favorit 612 S”