10 material differences · fewer than 12
Tractor oneDEUTZ-ALLIS DX 7.101984–1986No measured PTO figureTractor twoNew Holland 8560 A1996–1999No measured PTO figure
Which should you choose?
Read our verdict on the DX 7.10 and the 8560 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | DX 7.10 | 8560 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 157.0 hp | 157.8 hp | — |
| Engine declared | KHD BF6L 913 | New Holland 675 T-WM | differs |
| Displacement declared | 6.13 L | 7.48 L | +22% 8560 A |
| Maximum torque declared | 415 lb·ft · 563 N·m | 481 lb·ft · 652 N·m | +16% 8560 A |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Independent dry two-plate clutch | Electro-hydraulically operated, oil-immersed New Holland multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 26.0 gpm · 98.4 L/min | — |
| Pressure declared | 3,481 psi · 240 bar | 2,799 psi · 193 bar | +24% DX 7.10 |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 12,000 lb · 5,443 kg | 13,636 lb · 6,185 kg | +14% 8560 A |
| Maximum permissible mass declared | — | 20,944 lb · 9,500 kg | — |
| Wheelbase declared | 111.3 in · 2,826 mm | 107.2 in · 2,723 mm | — |
| Length declared | 187.8 in · 4,770 mm | 183.1 in · 4,650 mm | — |
| Width declared | 93.3 in · 2,370 mm | 90.9 in · 2,310 mm | — |
| Ground clearance declared | 19.3 in · 490 mm | 14.5 in · 369 mm | +33% DX 7.10 |
| Turning radius, braked declared | 22.0 ft · 6.72 m | — | — |
| Fuel tank declared | 158.5 qt · 150.0 L | 232.5 qt · 220.0 L | +47% 8560 A |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
DEUTZ-ALLIS DX 7.10 sources
- Source: Traktorenlexikon, “Deutz-Allis DX 7.10”
- Source: Traktorenlexikon, “Deutz-Fahr DX 160”
New Holland 8560 A sources
- Source: Traktorenlexikon, “New Holland 8560”