DEUTZ-ALLIS DX 4.70 vs UTB U-833 DT
7 material differences · fewer than 12
Which should you choose?
Read our verdict on the DX 4.70 and the U-833 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | DX 4.70 | U-833 DT | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 88.4 hp | 87.8 hp | — |
| Engine declared | KHD BF4L 913 | UTB 2404.062 | differs |
| Displacement declared | 4.09 L | 3.76 L | +9% DX 4.70 |
| Maximum torque declared | 236 lb·ft · 320 N·m | 232 lb·ft · 314 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Hydraulics & hitch | |||
| Pump flow declared | 12.9 gpm · 48.8 L/min | 10.6 gpm · 40.0 L/min | +22% DX 4.70 |
| Pressure declared | 3,481 psi · 240 bar | — | — |
| Three-point lift at ends declared | 5,404 lb · 2,451 kg | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,488 lb · 3,850 kg | 8,907 lb · 4,040 kg | — |
| Maximum permissible mass declared | 12,787 lb · 5,800 kg | — | — |
| Wheelbase declared | 91.7 in · 2,330 mm | 90.2 in · 2,291 mm | — |
| Length declared | 164.2 in · 4,170 mm | 163.4 in · 4,150 mm | — |
| Width declared | 90.7 in · 2,304 mm | 76.3 in · 1,939 mm | +19% DX 4.70 |
| Height declared | 103.9 in · 2,640 mm | 109.8 in · 2,790 mm | +6% U-833 DT |
| Ground clearance declared | 20.9 in · 530 mm | 13.8 in · 350 mm | +51% DX 4.70 |
| Turning radius, braked declared | — | 14.4 ft · 4.40 m | — |
| Fuel tank declared | 132.1 qt · 125.0 L | 105.7 qt · 100.0 L | +25% DX 4.70 |
DEUTZ-ALLIS DX 4.70 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis DX 4.70”
- Source: Traktorenlexikon, “Deutz-Fahr AgroStar 4.78”
UTB U-833 DT sources
Source
- Source: Traktorenlexikon, “UTB U 833 DT”