DEUTZ-ALLIS DX 4.70 vs SAME Explorer 90 (DT)

8 material differences · fewer than 12

Tractor one

1984–1986

No measured PTO figure

Tractor two

1986–1990

No measured PTO figure

Which should you choose?

Read our verdict on the DX 4.70 and the Explorer 90 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS DX 4.70 and SAME Explorer 90 (DT), field by field
Field	DX 4.70	Explorer 90 (DT)	Gap
Engine
Engine power, claimed claimed	88.4 hp	88.8 hp	—
Engine declared	KHD BF4L 913	SAME 1000.4 A Turbo	differs
Displacement declared	4.09 L	4.00 L	—
Maximum torque declared	236 lb·ft · 320 N·m	224 lb·ft · 304 N·m	+5% DX 4.70
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Pedal operated dry SAME single disc clutch	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	12.9 gpm · 48.8 L/min	9.5 gpm · 35.8 L/min	+36% DX 4.70
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	5,404 lb · 2,451 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,488 lb · 3,850 kg	6,614 lb · 3,000 kg	+28% DX 4.70
Maximum permissible mass declared	12,787 lb · 5,800 kg	—	—
Wheelbase declared	91.7 in · 2,330 mm	95.1 in · 2,415 mm	—
Length declared	164.2 in · 4,170 mm	145.2 in · 3,687 mm	+13% DX 4.70
Width declared	90.7 in · 2,304 mm	73.6 in · 1,870 mm	+23% DX 4.70
Height declared	103.9 in · 2,640 mm	102.1 in · 2,593 mm	—
Ground clearance declared	20.9 in · 530 mm	20.5 in · 520 mm	—
Turning radius, braked declared	—	9.6 ft · 2.94 m	—
Fuel tank declared	132.1 qt · 125.0 L	116.2 qt · 110.0 L	+14% DX 4.70

Source

Source