10 material differences · fewer than 12

Tractor oneDEUTZ-ALLIS DX 4.701984–1986No measured PTO figureTractor twoJohn Deere 5510 (A)1997–2000No measured PTO figure

Which should you choose?

Read our verdict on the DX 4.70 and the 5510 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS DX 4.70 and John Deere 5510 (A), field by field
Field	DX 4.70	5510 (A)	Gap
Engine
Engine power, claimed claimed	88.4 hp	87.8 hp	—
Engine declared	KHD BF4L 913	John Deere-PowerTech 4.045 T	differs
Displacement declared	4.09 L	4.52 L	+11% 5510 (A)
Maximum torque declared	236 lb·ft · 320 N·m	236 lb·ft · 320 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	—	Pedal-operated dry double clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	12.9 gpm · 48.8 L/min	16.5 gpm · 62.5 L/min	+28% 5510 (A)
Pressure declared	3,481 psi · 240 bar	3,408 psi · 235 bar	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	8,488 lb · 3,850 kg	6,720 lb · 3,048 kg	+26% DX 4.70
Maximum permissible mass declared	12,787 lb · 5,800 kg	—	—
Wheelbase declared	91.7 in · 2,330 mm	85.7 in · 2,177 mm	+7% DX 4.70
Length declared	164.2 in · 4,170 mm	138.2 in · 3,510 mm	+19% DX 4.70
Width declared	90.7 in · 2,304 mm	68.7 in · 1,745 mm	+32% DX 4.70
Height, over the cab declared	103.9 in · 2,640 mm	100.0 in · 2,540 mm	—
Ground clearance declared	20.9 in · 530 mm	18.1 in · 460 mm	+15% DX 4.70
Fuel tank declared	132.1 qt · 125.0 L	71.9 qt · 68.0 L	+84% DX 4.70

Source

Source