DEUTZ-ALLIS DX 4.70 vs Deutz-Fahr DX 4.70 A

5 material differences · fewer than 12

Tractor one

1984–1986

No measured PTO figure

Tractor two

1983–1989

No measured PTO figure

Which should you choose?

Read our verdict on the DX 4.70 and the DX 4.70 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

5 material differences · 12 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS DX 4.70 and Deutz-Fahr DX 4.70 A, field by field
Field	DX 4.70	DX 4.70 A	Gap
Engine
Engine power, claimed claimed	88.4 hp	88.4 hp	—
Engine declared	KHD BF4L 913	KHD BF4L 913	—
Displacement declared	4.09 L	4.09 L	—
Maximum torque declared	236 lb·ft · 320 N·m	236 lb·ft · 320 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Independent dry double clutch	—
Hydraulics & hitch
Pump flow declared	12.9 gpm · 48.8 L/min	12.9 gpm · 48.8 L/min	—
Pressure declared	3,481 psi · 240 bar	3,481 psi · 240 bar	—
Three-point lift at ends declared	5,404 lb · 2,451 kg	8,378 lb · 3,800 kg	+55% DX 4.70 A
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,488 lb · 3,850 kg	9,193 lb · 4,170 kg	+8% DX 4.70 A
Maximum permissible mass declared	12,787 lb · 5,800 kg	13,669 lb · 6,200 kg	+7% DX 4.70 A
Wheelbase declared	91.7 in · 2,330 mm	94.5 in · 2,400 mm	—
Length declared	164.2 in · 4,170 mm	164.2 in · 4,170 mm	—
Width declared	90.7 in · 2,304 mm	90.7 in · 2,304 mm	—
Height declared	103.9 in · 2,640 mm	103.9 in · 2,640 mm	—
Ground clearance declared	20.9 in · 530 mm	17.9 in · 455 mm	+16% DX 4.70
Turning radius, braked declared	—	13.7 ft · 4.17 m	—
Fuel tank declared	132.1 qt · 125.0 L	132.1 qt · 125 L	—

Source

Source