DEUTZ-ALLIS 9150 vs Massey Ferguson MF 3650

12 material differences

Tractor one

1989–1990

No measured PTO figure

Tractor two

1987–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 9150 and the MF 3650 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 9150 and Massey Ferguson MF 3650, field by field
Field	9150	MF 3650	Gap
Engine
Engine power, claimed claimed	149.9 hp	148.0 hp	—
Engine declared	K.H.D. BF6L 913 C-TI	Perkins AT 6.354 CC	differs
Displacement declared	6.13 L	5.81 L	+6% 9150
Maximum torque declared	—	331 lb·ft · 449 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal operated dry single-plate clutch type 14	Pedal operated, dry and air cooled VALEO single disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	24.0 gpm · 90.7 L/min	15.4 gpm · 58.3 L/min	+56% 9150
Three-point lift at ends declared	7,211 lb · 3,271 kg	12,214 lb · 5,540 kg	+69% MF 3650
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	13,521 lb · 6,133 kg	11,784 lb · 5,345 kg	+15% 9150
Wheelbase declared	120.0 in · 3,048 mm	109.3 in · 2,777 mm	+10% 9150
Length declared	188.0 in · 4,775 mm	183.0 in · 4,649 mm	—
Width declared	96.0 in · 2,438 mm	82.2 in · 2,088 mm	+17% 9150
Height declared	122.0 in · 3,099 mm	114.4 in · 2,905 mm	+7% 9150
Ground clearance declared	23.0 in · 584 mm	16.9 in · 428 mm	+36% 9150
Turning radius, braked declared	13.4 ft · 4.09 m	—	—
Fuel tank declared	367.7 qt · 348.0 L	274.7 qt · 260.0 L	+34% 9150

Source

Source