9 material differences · fewer than 12

Tractor oneDEUTZ-ALLIS 91301989–1990No measured PTO figureTractor twoDeutz-Fahr DX 6.50 A1983–1990No measured PTO figure

Which should you choose?

Read our verdict on the 9130 and the DX 6.50 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 9130 and Deutz-Fahr DX 6.50 A, field by field
Field	9130	DX 6.50 A	Gap
Engine
Engine power, claimed claimed	135.2 hp	135.2 hp	—
Engine declared	K.H.D. BF6L 913 C-TI	KHD BF6L 913.101T	differs
Displacement declared	6.13 L	6.13 L	—
Maximum torque declared	—	375 lb·ft · 508 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Rockford single-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	24.0 gpm · 90.7 L/min	15.2 gpm · 57.6 L/min	+57% 9130
Pressure declared	3,771 psi · 260 bar	3,481 psi · 240 bar	+8% 9130
Three-point lift, at the coupling points declared	7,211 lb · 3,271 kg	14,330 lb · 6,500 kg	+99% DX 6.50 A
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,300 lb · 5,579 kg	12,081 lb · 5,480 kg	—
Maximum permissible mass declared	—	17,637 lb · 8,000 kg	—
Wheelbase declared	120.0 in · 3,048 mm	106.4 in · 2,703 mm	+13% 9130
Length declared	188.0 in · 4,775 mm	179.5 in · 4,560 mm	—
Width declared	96.0 in · 2,438 mm	93.3 in · 2,370 mm	—
Height, over the cab declared	122.0 in · 3,099 mm	109.6 in · 2,785 mm	+11% 9130
Ground clearance declared	23.0 in · 584 mm	22.4 in · 570 mm	—
Turning radius, braked declared	13.4 ft · 4.09 m	17.0 ft · 5.17 m	+26% DX 6.50 A
Fuel tank declared	360.3 qt · 341.0 L	158.5 qt · 150 L	+127% 9130

Source

Source