DEUTZ-ALLIS 8070 vs Massey Ferguson MF 3670 (A)

12 material differences

Tractor one

1985–1988

No measured PTO figure

Tractor two

1990–1995

No measured PTO figure

Which should you choose?

Read our verdict on the 8070 and the MF 3670 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 8070 and Massey Ferguson MF 3670 (A), field by field
Field	8070	MF 3670 (A)	Gap
Engine
Engine power, claimed claimed	169.6 hp	167.8 hp	—
Engine declared	ALLIS-CHALMERS 670 TI	Valmet 620 DS	differs
Displacement declared	6.98 L	6.60 L	+6% 8070
Maximum torque declared	—	449 lb·ft · 609 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Electro-hydraulically operated wet multi-plate clutch	Pedal-operated, dry and air-cooled VALEO single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	Open centre	differs
Pump flow declared	22.0 gpm · 83.3 L/min	—	—
Pressure declared	3,771 psi · 260 bar	2,277–2,350 psi · 157–162 bar	differs
Three-point lift at ends declared	—	14,110 lb · 6,400 kg	—
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	16,850 lb · 7,643 kg	14,573 lb · 6,610 kg	+16% 8070
Wheelbase declared	106.0 in · 2,692 mm	115.2 in · 2,925 mm	+9% MF 3670 (A)
Length declared	187.0 in · 4,750 mm	198.8 in · 5,050 mm	+6% MF 3670 (A)
Width declared	95.5 in · 2,426 mm	94.5 in · 2,400 mm	—
Height declared	116.0 in · 2,946 mm	118.1 in · 3,000 mm	—
Ground clearance declared	22.0 in · 559 mm	16.9 in · 430 mm	+30% 8070
Turning radius, braked declared	13.3 ft · 4.06 m	—	—
Fuel tank declared	239.9 qt · 227.0 L	323.3 qt · 306.0 L	+35% MF 3670 (A)

Source

Source