DEUTZ-ALLIS 8070 vs John Deere 4560 (A)

10 material differences · fewer than 12

Tractor one

DEUTZ-ALLIS 8070

1985–1988

No measured PTO figure

Tractor two

John Deere 4560 (A)

1992–1994

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because they were not built in overlapping years (1985–1988; 1992–1994). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

10 material differences · 5 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 8070 and John Deere 4560 (A), field by field
Field80704560 (A)Gap
Engine
Engine power, claimed claimed169.6 hp167.8 hp
Engine declaredALLIS-CHALMERS 670 TIJohn Deere 6.076 TRW-07differs
Displacement declared6.98 L7.63 L+9% 4560 (A)
Transmission
Top speed declared18.6 mph · 30 km/h18.6 mph · 30 km/h
Clutch declaredElectro-hydraulically operated wet multi-plate clutchPedal-operated hydraulic and oil-cooled multi-disc clutchdiffers
Hydraulics & hitch
Hydraulic centre declaredClosed centreClosed centre
Pump flow declared22.0 gpm · 83.3 L/min
Pressure declared3,771 psi · 260 bar2,582 psi · 178 bar+46% 8070
Rear PTO speeds declared1000 rpm1000 rpm
Weight & dimensions
Unladen weight declared16,850 lb · 7,643 kg15,840 lb · 7,185 kg+6% 8070
Wheelbase declared106.0 in · 2,692 mm118.5 in · 3,010 mm+12% 4560 (A)
Length declared187.0 in · 4,750 mm213.4 in · 5,420 mm+14% 4560 (A)
Width declared95.5 in · 2,426 mm118.0 in · 2,997 mm+24% 4560 (A)
Height declared116.0 in · 2,946 mm118.9 in · 3,020 mm
Ground clearance declared22.0 in · 559 mm16.5 in · 420 mm+33% 8070
Turning radius, braked declared13.3 ft · 4.06 m
Fuel tank declared239.9 qt · 227.0 L407.9 qt · 386.0 L+70% 4560 (A)

DEUTZ-ALLIS 8070 sources

Source
  • Source: Traktorenlexikon, “Deutz-Allis 8070”
  • Source: Traktorenlexikon, “Deutz-Allis 8050”

John Deere 4560 (A) sources

Source
  • Source: Traktorenlexikon, “John Deere 4560”