DEUTZ-ALLIS 8050 vs WHITE 4-150
11 material differences · fewer than 12
Which should you choose?
Read our verdict on the 8050 and the 4-150 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 8050 | 4-150 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 151.9 hp | 151.9 hp | — |
| Engine declared | ALLIS-CHALMERS 670 TI | CATERPILLAR 3208/V-8 | differs |
| Displacement declared | 6.98 L | 10.43 L | +49% 4-150 |
| Maximum torque declared | — | 409 lb·ft · 555 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | electrohydraulically operated wet multi-plate clutch | Pedal-operated dry single-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | Closed centre | — |
| Pump flow declared | 22.0 gpm · 83.3 L/min | 20.0 gpm · 75.7 L/min | +10% 8050 |
| Pressure declared | 3,771 psi · 260 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 15,304 lb · 6,942 kg | 14,500 lb · 6,577 kg | +6% 8050 |
| Wheelbase declared | 106.0 in · 2,692 mm | 115.6 in · 2,936 mm | +9% 4-150 |
| Length declared | 187.0 in · 4,750 mm | 236.0 in · 5,994 mm | +26% 4-150 |
| Width declared | 95.5 in · 2,426 mm | 80.6 in · 2,048 mm | +18% 8050 |
| Height declared | 115.0 in · 2,921 mm | 116.0 in · 2,946 mm | — |
| Ground clearance declared | 22.0 in · 559 mm | 27.4 in · 696 mm | +25% 4-150 |
| Turning radius, braked declared | 12.1 ft · 3.68 m | — | — |
| Fuel tank declared | 239.9 qt · 227.0 L | 376.2 qt · 356.0 L | +57% 4-150 |
DEUTZ-ALLIS 8050 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 8050”
WHITE 4-150 sources
Source
- Source: Traktorenlexikon, “White 4-150”
- Source: Traktorenlexikon, “White 2-180”