6 material differences · fewer than 12
Tractor oneDEUTZ-ALLIS 80501985–1988No measured PTO figureTractor twoFord TW-251983–1989No measured PTO figure
Which should you choose?
Read our verdict on the 8050 and the TW-25 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 8050 | TW-25 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 151.9 hp | 151.9 hp | — |
| Engine declared | ALLIS-CHALMERS 670 TI | — | — |
| Displacement declared | 6.98 L | — | — |
| Maximum torque declared | — | 406 lb·ft · 550 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | electrohydraulically operated wet multi-plate clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | 22.0 gpm · 83.3 L/min | 15.3 gpm · 58.0 L/min | +44% 8050 |
| Pressure declared | 3,771 psi · 260 bar | 2,799 psi · 193 bar | +35% 8050 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 15,304 lb · 6,942 kg | 14,859 lb · 6,740 kg | — |
| Wheelbase declared | 106.0 in · 2,692 mm | 109.7 in · 2,786 mm | — |
| Length declared | 187.0 in · 4,750 mm | 191.1 in · 4,854 mm | — |
| Width declared | 95.5 in · 2,426 mm | 83.6 in · 2,123 mm | +14% 8050 |
| Height, over the cab declared | 115.0 in · 2,921 mm | 114.0 in · 2,895 mm | — |
| Ground clearance declared | 22.0 in · 559 mm | 18.0–19.7 in · 458–501 mm | differs |
| Turning radius, braked declared | 12.1 ft · 3.68 m | 13.3 ft · 4.05 m | +10% TW-25 |
| Fuel tank declared | 239.9 qt · 227.0 L | 399.4 qt · 378.0 L | +67% TW-25 |
DEUTZ-ALLIS 8050 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 8050”
Ford TW-25 sources
Source
- Source: Traktorenlexikon, “Ford TW 25”