DEUTZ-ALLIS 7145 or SOMECA 1300 Super (DT)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 7145 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1300 Super (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The DEUTZ-ALLIS 7145 suits loader and hydraulic implement work better on this data: 127% (57.8 L/min / 15.3 gpm) more hydraulic flow.
  • The DEUTZ-ALLIS 7145 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for DEUTZ-ALLIS 7145 and SOMECA 1300 Super (DT), with the call on each
Question71451300 Super (DT)Call
Which puts more power through the PTO shaft?107.4 kW (144.0 hp)Traktorenlexikon, “Deutz-Allis 7145”106.6 kW (143.0 hp)Traktorenlexikon, “Someca 1300 S”Not comparableNot comparable on power at the PTO shaft: the 7145 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1300 Super (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 7145 and the 1300 Super (DT).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 7145 and the 1300 Super (DT).
Which pumps more oil for implements?103.3 L/min (27.3 gpm)Traktorenlexikon, “Deutz-Allis 7145”45.5 L/min (12.0 gpm)Traktorenlexikon, “Someca 1300 S”AheadThe DEUTZ-ALLIS 7145 has 127% more hydraulic flow (57.8 L/min / 15.3 gpm) than the SOMECA 1300 Super (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?4,469 kg (9,852 lb)Traktorenlexikon, “Someca 1300 S”No figureNo call on three-point lift: no figure on record for the 7145.
Which is heavier, for traction?5,400 kg (11,905 lb)Traktorenlexikon, “Deutz-Allis 7145”5,060 kg (11,155 lb)Traktorenlexikon, “Someca 1300 S”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 7145 and the 1300 Super (DT).
Which has the wider choice of gears?36Traktorenlexikon, “Deutz-Allis 7145”12 to 16Traktorenlexikon, “Someca 1300 S”AheadThe DEUTZ-ALLIS 7145 has 125% more forward gears (20 gears) than the SOMECA 1300 Super (DT) (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 7145 and the 1300 Super (DT).
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Deutz-Allis 7145”25 km/h (15.5 mph)Traktorenlexikon, “Someca 1300 S”AheadThe DEUTZ-ALLIS 7145 has 20% more top speed (5.0 km/h / 3.1 mph) than the SOMECA 1300 Super (DT) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Allis 7145”540/1000 rpmTraktorenlexikon, “Someca 1300 S”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Allis 7145”independentTraktorenlexikon, “Someca 1300 S”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Allis 7145”Two-wheel or four-wheel driveTraktorenlexikon, “Someca 1300 S”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1987–19891978–1981Ahead (a fact, not an advantage)The DEUTZ-ALLIS 7145 is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The DEUTZ-ALLIS 7145 has 127% more hydraulic flow (57.8 L/min / 15.3 gpm) than the SOMECA 1300 Super (DT) (both pump flow, as stated by the source).
  • The DEUTZ-ALLIS 7145 has 125% more forward gears (20 gears) than the SOMECA 1300 Super (DT) (both forward gears, as stated by the source).
  • The DEUTZ-ALLIS 7145 has 20% more top speed (5.0 km/h / 3.1 mph) than the SOMECA 1300 Super (DT) (both top speed forward, as stated by the source).
  • The DEUTZ-ALLIS 7145 is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 7145 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1300 Super (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources