DEUTZ-ALLIS 7120 vs Schlüter Super 1250 VL

9 material differences · fewer than 12

Tractor one

1986–1989

No measured PTO figure

Tractor two

1972–1991

No measured PTO figure

Which should you choose?

Read our verdict on the 7120 and the Super 1250 VL → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 7120 and Schlüter Super 1250 VL, field by field
Field	7120	Super 1250 VL	Gap
Engine
Engine power, claimed claimed	122.3 hp	123 hp	—
Engine declared	K.H.D. BF6L 913 T	Schlüter SDM 110 W6 (ab 1/1985 = SDM 112 W6)	differs
Displacement declared	6.13 L	—	—
Maximum torque declared	—	391 lb·ft · 530 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	21.7–24.9 mph · 35–40 km/h	differs
Clutch declared	dry single clutch	Voith turbo clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	24.0 gpm · 90.8 L/min	10.0 gpm · 37.9 L/min	+140% 7120
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	14,330 lb · 6,500 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,244 lb · 5,100 kg	11,100–13,448 lb · 5,035–6,100 kg	differs
Wheelbase declared	105.8 in · 2,687 mm	103.8–110.6 in · 2,637–2,810 mm	—
Length declared	179.5 in · 4,560 mm	177.8–187.4 in · 4,515–4,760 mm	—
Width declared	93.3 in · 2,370 mm	87.0–98.4 in · 2,210–2,500 mm	differs
Height declared	109.6 in · 2,784 mm	95.7–113.2 in · 2,430–2,875 mm	differs
Ground clearance declared	24.4 in · 620 mm	17.7 in · 450 mm	+38% 7120
Turning radius, braked declared	—	15.1 ft · 4.60 m	—
Fuel tank declared	159.6 qt · 151.0 L	327.6 qt · 310 L	+105% Super 1250 VL

Source

Source