11 material differences · fewer than 12
Tractor oneDEUTZ-ALLIS 71201986–1989No measured PTO figureTractor twoFendt Favorit 712 Variofrom 1999No measured PTO figure
Which should you choose?
Read our verdict on the 7120 and the Favorit 712 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 7120 | Favorit 712 Vario | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 122.3 hp | 122.7 hp | — |
| Engine declared | K.H.D. BF6L 913 T | Deutz BF6M 2013 C | differs |
| Displacement declared | 6.13 L | 5.70 L | +7% 7120 |
| Maximum torque declared | — | 453 lb·ft · 613.8 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 31.1 mph · 50 km/h | +67% Favorit 712 Vario |
| Clutch declared | dry single clutch | Multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Closed centre | differs |
| Pump flow declared | 24.0 gpm · 90.8 L/min | 20.7 gpm · 78.5 L/min | +16% 7120 |
| Pressure declared | 3,481 psi · 240 bar | 2,466 psi · 170 bar | +41% 7120 |
| Rear PTO speeds declared | 540/1000 rpm | 540/750/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,244 lb · 5,100 kg | 12,566–13,603 lb · 5,700–6,170 kg | differs |
| Maximum permissible mass declared | — | 20,944 lb · 9,500 kg | — |
| Wheelbase declared | 105.8 in · 2,687 mm | 106.3 in · 2,700 mm | — |
| Length declared | 179.5 in · 4,560 mm | 181.7–182.7 in · 4,615–4,640 mm | — |
| Width declared | 93.3 in · 2,370 mm | 94.1–95.6 in · 2,390–2,429 mm | — |
| Ground clearance declared | 24.4 in · 620 mm | 20.8 in · 528 mm | +17% 7120 |
| Turning radius, braked declared | — | 16.1 ft · 4.90 m | — |
| Fuel tank declared | 159.6 qt · 151.0 L | 317.0 qt · 300 L | +99% Favorit 712 Vario |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
DEUTZ-ALLIS 7120 sources
- Source: Traktorenlexikon, “Deutz-Allis 7120”
Fendt Favorit 712 Vario sources
- Source: Traktorenlexikon, “Fendt Favorit 712 Vario”
- Source: Traktorenlexikon, “Fendt Favorit 714 Vario”
- Source: OECD test report 1943, 2000