5 material differences · fewer than 12
Tractor oneDEUTZ-ALLIS 70851986–1990No measured PTO figureTractor twoMassey Ferguson MF 6981982–1984No measured PTO figure
Which should you choose?
Read our verdict on the 7085 and the MF 698 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 7085 | MF 698 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 87.7 hp | 87 hp | — |
| Engine declared | KHD BF4L 913 | Perkins A 4.318.2 | differs |
| Displacement declared | 4.09 L | 5.21 L | +28% MF 698 |
| Maximum torque declared | 236 lb·ft · 320 N·m | 261 lb·ft · 354 N·m | +11% MF 698 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.1 mph · 29.1 km/h | — |
| Clutch declared | Independent dry double clutch | dry disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Hydraulic control declared | — | Constant flow | — |
| Pump flow declared | 19.6 gpm · 74.2 L/min | — | — |
| Pressure declared | 3,481 psi · 240 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,466 lb · 3,840 kg | 7,716 lb · 3,500 kg | +10% 7085 |
| Wheelbase declared | 92.0 in · 2,337 mm | 95.7 in · 2,430 mm | — |
| Length declared | 164.5 in · 4,178 mm | 160.6 in · 4,080 mm | — |
| Width declared | 90.5 in · 2,299 mm | — | — |
| Ground clearance declared | 17.9 in · 455 mm | — | — |
| Fuel tank declared | 123.6 qt · 117.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
DEUTZ-ALLIS 7085 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 7085”
- Source: Traktorenlexikon, “Deutz-Fahr AgroStar 4.78”
Massey Ferguson MF 698 sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 698”