DEUTZ-ALLIS 7085 vs Deutz-Fahr DX 4.70 A

5 material differences · fewer than 12

Tractor one

1986–1990

No measured PTO figure

Tractor two

1983–1989

No measured PTO figure

Which should you choose?

Read our verdict on the 7085 and the DX 4.70 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

5 material differences · 12 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 7085 and Deutz-Fahr DX 4.70 A, field by field
Field	7085	DX 4.70 A	Gap
Engine
Engine power, claimed claimed	87.7 hp	88.4 hp	—
Engine declared	KHD BF4L 913	KHD BF4L 913	—
Displacement declared	4.09 L	4.09 L	—
Maximum torque declared	236 lb·ft · 320 N·m	236 lb·ft · 320 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Independent dry double clutch	Independent dry double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	19.6 gpm · 74.2 L/min	12.9 gpm · 48.8 L/min	+52% 7085
Pressure declared	3,481 psi · 240 bar	3,481 psi · 240 bar	—
Three-point lift at ends declared	5,406 lb · 2,452 kg	8,378 lb · 3,800 kg	+55% DX 4.70 A
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,466 lb · 3,840 kg	9,193 lb · 4,170 kg	+9% DX 4.70 A
Maximum permissible mass declared	—	13,669 lb · 6,200 kg	—
Wheelbase declared	92.0 in · 2,337 mm	94.5 in · 2,400 mm	—
Length declared	164.5 in · 4,178 mm	164.2 in · 4,170 mm	—
Width declared	90.5 in · 2,299 mm	90.7 in · 2,304 mm	—
Height declared	104.0 in · 2,642 mm	103.9 in · 2,640 mm	—
Ground clearance declared	17.9 in · 455 mm	17.9 in · 455 mm	—
Turning radius, braked declared	—	13.7 ft · 4.17 m	—
Fuel tank declared	123.6 qt · 117.0 L	132.1 qt · 125 L	+7% DX 4.70 A

Source

Source