DEUTZ-ALLIS 6260 or SOMECA 570 V/E?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 6260 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 570 V/E has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The DEUTZ-ALLIS 6260 suits loader and hydraulic implement work better on this data: 93% (22.9 L/min / 6.0 gpm) more hydraulic flow and 20% (400 kg / 882 lb) more three-point lift.
  • The DEUTZ-ALLIS 6260 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for DEUTZ-ALLIS 6260 and SOMECA 570 V/E, with the call on each
Question6260570 V/ECall
Which puts more power through the PTO shaft?42.7 kW (57.3 hp)Traktorenlexikon, “Deutz-Allis 6260”42.7 kW (57.3 hp)Traktorenlexikon, “Someca 570 V/E”Not comparableNot comparable on power at the PTO shaft: the 6260 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 570 V/E has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 6260 and the 570 V/E.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 6260 and the 570 V/E.
Which pumps more oil for implements?47.5 L/min (12.5 gpm)Traktorenlexikon, “Deutz-Allis 6260”24.6 L/min (6.5 gpm)Traktorenlexikon, “Someca 570 V/E”AheadThe DEUTZ-ALLIS 6260 has 93% more hydraulic flow (22.9 L/min / 6.0 gpm) than the SOMECA 570 V/E (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,400 kg (5,291 lb)Traktorenlexikon, “Deutz-Allis 6260”2,000 kg (4,409 lb)Traktorenlexikon, “Someca 570 V/E”AheadThe DEUTZ-ALLIS 6260 has 20% more lift (400 kg / 882 lb) than the SOMECA 570 V/E (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,930 kg (6,460 lb)Traktorenlexikon, “Deutz-Allis 6260”1,960 kg (4,321 lb)Traktorenlexikon, “Someca 570 V/E”Ahead (a fact, not an advantage)The DEUTZ-ALLIS 6260 is 49% heavier (970 kg / 2,138 lb) than the SOMECA 570 V/E (both unladen weight, as stated by the source).
Which may carry more ballast and load?5,000 kg (11,023 lb)Traktorenlexikon, “Deutz-Allis 6260”No figureNo call on maximum permissible mass: no figure on record for the 570 V/E.
Which has the wider choice of gears?8 to 16Traktorenlexikon, “Deutz-Allis 6260”8 to 16Traktorenlexikon, “Someca 570 V/E”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 6260 and the 570 V/E.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Deutz-Allis 6260”25 km/h (15.5 mph)Traktorenlexikon, “Someca 570 V/E”AheadThe DEUTZ-ALLIS 6260 has 20% more top speed (5.0 km/h / 3.1 mph) than the SOMECA 570 V/E (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Allis 6260”540 rpmTraktorenlexikon, “Someca 570 V/E”AheadThe DEUTZ-ALLIS 6260 offers 1000 rpm at the PTO, which the SOMECA 570 V/E does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Allis 6260”independentTraktorenlexikon, “Someca 570 V/E”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Allis 6260”Two-wheel or four-wheel driveTraktorenlexikon, “Someca 570 V/E”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1986–19901978–1982Ahead (a fact, not an advantage)The DEUTZ-ALLIS 6260 is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The DEUTZ-ALLIS 6260 has 93% more hydraulic flow (22.9 L/min / 6.0 gpm) than the SOMECA 570 V/E (both pump flow, as stated by the source).
  • The DEUTZ-ALLIS 6260 has 20% more lift (400 kg / 882 lb) than the SOMECA 570 V/E (both lift at the hitch ends, as stated by the source).
  • The DEUTZ-ALLIS 6260 is 49% heavier (970 kg / 2,138 lb) than the SOMECA 570 V/E (both unladen weight, as stated by the source).
  • The DEUTZ-ALLIS 6260 has 20% more top speed (5.0 km/h / 3.1 mph) than the SOMECA 570 V/E (both top speed forward, as stated by the source).
  • The DEUTZ-ALLIS 6260 offers 1000 rpm at the PTO, which the SOMECA 570 V/E does not (as stated by the sources).
  • The DEUTZ-ALLIS 6260 is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 6260 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 570 V/E has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources