8 material differences · fewer than 12
Tractor oneDEUTZ-ALLIS 62501986–1990No measured PTO figureTractor twoZETOR 3320/33401993–1997No measured PTO figure
Which should you choose?
Read our verdict on the 6250 and the 3320/3340 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 6250 | 3320/3340 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 50.3 hp | 50.3 hp | — |
| Engine declared | KHD F3L 912 | ZBROJORKA Z-5201 | differs |
| Displacement declared | 2.83 L | 2.70 L | — |
| Maximum torque declared | 122 lb·ft · 166 N·m | 117 lb·ft · 158 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | Independent dry double clutch | dry Zbrojovka double clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Constant flow | — |
| Pump flow declared | 11.6 gpm · 43.9 L/min | 8.5 gpm · 32.0 L/min | +37% 6250 |
| Pressure declared | — | 3,191 psi · 220 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,019 lb · 2,730 kg | 6,382 lb · 2,895 kg | +6% 3320/3340 |
| Maximum permissible mass declared | 11,023 lb · 5,000 kg | — | — |
| Wheelbase declared | 79.2 in · 2,012 mm | 83.2 in · 2,114 mm | — |
| Length declared | 137.4 in · 3,490 mm | 143.3 in · 3,640 mm | — |
| Width declared | 82.3 in · 2,090 mm | 70.9–85.8 in · 1,800–2,180 mm | differs |
| Ground clearance declared | 16.1 in · 410 mm | 14.8 in · 375 mm | +9% 6250 |
| Turning radius, braked declared | — | 11.5 ft · 3.51 m | — |
| Fuel tank declared | 79.3 qt · 75.0 L | 58.1 qt · 55.0 L | +36% 6250 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
DEUTZ-ALLIS 6250 sources
- Source: Traktorenlexikon, “Deutz-Allis 6250”
- Source: Traktorenlexikon, “Deutz D 4006 P”
ZETOR 3320/3340 sources
- Source: Traktorenlexikon, “Zetor 3320/3340”
- Source: Traktorenlexikon, “Zetor 5211”