DEUTZ-ALLIS 6250 vs Hürlimann H-350 (A)
10 material differences · fewer than 12
Which should you choose?
Read our verdict on the 6250 and the H-350 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 6250 | H-350 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 50.3 hp | 51.2 hp | — |
| Engine declared | KHD F3L 912 | SAME 983-L | differs |
| Displacement declared | 2.83 L | 2.72 L | — |
| Maximum torque declared | 122 lb·ft · 166 N·m | 141 lb·ft · 191 N·m | +15% H-350 (A) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 6250 |
| Clutch declared | Independent dry double clutch | Dry double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 11.6 gpm · 43.9 L/min | — | — |
| Three-point lift at ends declared | 5,291 lb · 2,400 kg | 5,313 lb · 2,410 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,019 lb · 2,730 kg | 4,365 lb · 1,980 kg | +38% 6250 |
| Maximum permissible mass declared | 11,023 lb · 5,000 kg | — | — |
| Wheelbase declared | 79.2 in · 2,012 mm | 79.1 in · 2,010 mm | — |
| Length declared | 137.4 in · 3,490 mm | 140.6 in · 3,570 mm | — |
| Width declared | 82.3 in · 2,090 mm | 70.9 in · 1,800 mm | +16% 6250 |
| Height declared | 91.3 in · 2,320 mm | 85.8 in · 2,180 mm | +6% 6250 |
| Ground clearance declared | 16.1 in · 410 mm | 11.8 in · 300 mm | +37% 6250 |
| Fuel tank declared | 79.3 qt · 75.0 L | 57.1 qt · 54.0 L | +39% 6250 |
DEUTZ-ALLIS 6250 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 6250”
- Source: Traktorenlexikon, “Deutz D 4006 P”
Hürlimann H-350 (A) sources
Source
- Source: Traktorenlexikon, “Hürlimann H 350 (A)”
- Source: Traktorenlexikon, “Lamborghini 483 DT”