7 material differences · fewer than 12
Tractor oneDEUTZ-ALLIS 62501986–1990No measured PTO figureTractor twoDexheimer Allrad 345 N1976–1985No measured PTO figure
Which should you choose?
Read our verdict on the 6250 and the Allrad 345 N → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 6250 | Allrad 345 N | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 50.3 hp | 50 hp | — |
| Engine declared | KHD F3L 912 | — | — |
| Displacement declared | 2.83 L | — | — |
| Maximum torque declared | 122 lb·ft · 166 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 6250 |
| Clutch declared | Independent dry double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 11.6 gpm · 43.9 L/min | 10.8 gpm · 41 L/min | +7% 6250 |
| Rear PTO speeds declared | 540/1000 rpm | — | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,019 lb · 2,730 kg | 3,583 lb · 1,625 kg | +68% 6250 |
| Maximum permissible mass declared | 11,023 lb · 5,000 kg | — | — |
| Wheelbase declared | 79.2 in · 2,012 mm | 81.1 in · 2,060 mm | — |
| Length declared | 137.4 in · 3,490 mm | 114.2 in · 2,900 mm | +20% 6250 |
| Width declared | 82.3 in · 2,090 mm | 39.8 in · 1,010 mm | +107% 6250 |
| Ground clearance declared | 16.1 in · 410 mm | 10.6 in · 270 mm | +52% 6250 |
| Turning radius, braked declared | — | 6.9 ft · 2.10 m | — |
| Fuel tank declared | 79.3 qt · 75.0 L | 52.8 qt · 50 L | +50% 6250 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
DEUTZ-ALLIS 6250 sources
- Source: Traktorenlexikon, “Deutz-Allis 6250”
- Source: Traktorenlexikon, “Deutz D 4006 P”
Dexheimer Allrad 345 N sources
- Source: Traktorenlexikon, “Dexheimer ALLRAD 345 N”