DEUTZ-ALLIS 6240 vs Steyr 8045 (a)

9 material differences · fewer than 12

Tractor one

1986–1990

No measured PTO figure

Tractor two

1988–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 6240 and the 8045 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 6240 and Steyr 8045 (a), field by field
Field	6240	8045 (a)	Gap
Engine
Engine power, claimed claimed	44.0 hp	41.4 hp	+6% 6240
Engine declared	KHD F3L 912	Steyr WD 308.48	differs
Displacement declared	2.83 L	2.36 L	+20% 6240
Maximum torque declared	123 lb·ft · 167 N·m	111 lb·ft · 150 N·m	+11% 6240
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Independent dry double clutch	Dry Fichtel & Sachs double clutch	differs
Hydraulics & hitch
Pump flow declared	7.7 gpm · 29.1 L/min	—	—
Pressure declared	3,481 psi · 240 bar	3,553 psi · 245 bar	—
Three-point lift at ends declared	4,189 lb · 1,900 kg	4,299 lb · 1,950 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,776 lb · 2,620 kg	4,189 lb · 1,900 kg	+38% 6240
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	79.2 in · 2,012 mm	74.8 in · 1,899 mm	+6% 6240
Length declared	137.4 in · 3,490 mm	130.9 in · 3,324 mm	—
Width declared	82.3 in · 2,090 mm	66.1 in · 1,679 mm	+24% 6240
Height declared	88.6 in · 2,250 mm	83.9 in · 2,132 mm	+6% 6240
Ground clearance declared	16.1 in · 410 mm	16.3 in · 415 mm	—
Turning radius, braked declared	—	10.5 ft · 3.21 m	—
Fuel tank declared	79.3 qt · 75.0 L	56.0 qt · 53.0 L	+42% 6240

Source

Source