8 material differences · fewer than 12
Tractor oneDEUTZ-ALLIS 61501985–1989No measured PTO figureTractor twoSteyr 8065 (a)1986–1992No measured PTO figure
Which should you choose?
Read our verdict on the 6150 and the 8065 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 6150 | 8065 (a) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 56.2 hp | 55.3 hp | — |
| Engine declared | KHD F3L 913 | Steyr WD-311.87 or WD-311.85 | differs |
| Displacement declared | 3.06 L | 2.59 L | +18% 6150 |
| Maximum torque declared | — | 147 lb·ft · 199 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–24.9 mph · 25–40 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 13.1 gpm · 49.6 L/min | — | — |
| Pressure declared | — | 3,553 psi · 245 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,934 lb · 2,238 kg | 5,368 lb · 2,435 kg | +9% 8065 (a) |
| Wheelbase declared | 77.0 in · 1,956 mm | 78.7 in · 1,998 mm | — |
| Length declared | 130.5 in · 3,315 mm | 137.6 in · 3,495 mm | +5% 8065 (a) |
| Width declared | 64.7 in · 1,643 mm | 67.8 in · 1,722 mm | — |
| Height, over the cab declared | 103.1 in · 2,620 mm | 90.3 in · 2,293 mm | +14% 6150 |
| Ground clearance declared | 16.1 in · 409 mm | 16.9 in · 430 mm | — |
| Turning radius, braked declared | 10.4 ft · 3.17 m | 10.3 ft · 3.14 m | — |
| Fuel tank declared | 60.2 qt · 57.0 L | 63.4 qt · 60.0 L | +5% 8065 (a) |
DEUTZ-ALLIS 6150 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 6150”
- Source: Traktorenlexikon, “Fendt Farmer 260 S/SA”
Steyr 8065 (a) sources
Source
- Source: Traktorenlexikon, “Steyr 8065”