DEUTZ-ALLIS 6080 vs Renault 90-32 MX

8 material differences · fewer than 12

Tractor one

1985–1988

No measured PTO figure

Tractor two

1988–1993

No measured PTO figure

Which should you choose?

Read our verdict on the 6080 and the 90-32 MX → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 6080 and Renault 90-32 MX, field by field
Field	6080	90-32 MX	Gap
Engine
Engine power, claimed claimed	82.9 hp	81.9 hp	—
Engine declared	ALLIS-CHALMERS 433 TI	MWM D 226-4	differs
Displacement declared	3.29 L	4.15 L	+26% 90-32 MX
Maximum torque declared	—	208 lb·ft · 282 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Dry LuK double clutch type DT 330/330	—
Hydraulics & hitch
Pump flow declared	19.0 gpm · 71.9 L/min	11.5 gpm · 43.4 L/min	+66% 6080
Three-point lift at ends declared	—	10,075 lb · 4,570 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,100 lb · 2,767 kg	8,157 lb · 3,700 kg	+34% 90-32 MX
Maximum permissible mass declared	—	12,787 lb · 5,800 kg	—
Wheelbase declared	96.0 in · 2,438 mm	95.7 in · 2,430 mm	—
Length declared	149.8 in · 3,805 mm	154.7 in · 3,930 mm	—
Width declared	73.1 in · 1,857 mm	80.3 in · 2,040 mm	+10% 90-32 MX
Height declared	103.2 in · 2,621 mm	99.2 in · 2,520 mm	—
Ground clearance declared	21.1 in · 536 mm	19.3 in · 490 mm	+9% 6080
Turning radius, braked declared	11.9 ft · 3.63 m	13.3 ft · 4.05 m	+12% 90-32 MX
Fuel tank declared	127.9 qt · 121.0 L	121.5 qt · 115.0 L	—

Source

Source