8 material differences · fewer than 12
Tractor oneDEUTZ-ALLIS 60801985–1988No measured PTO figureTractor twoLandini 7800-Turbo (DT)1987–2000No measured PTO figure
Which should you choose?
Read our verdict on the 6080 and the 7800-Turbo (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 6080 | 7800-Turbo (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 82.9 hp | 82.9 hp | — |
| Engine declared | ALLIS-CHALMERS 433 TI | Perkins LT 4.236 | differs |
| Displacement declared | 3.29 L | 3.86 L | +17% 7800-Turbo (DT) |
| Maximum torque declared | — | 237 lb·ft · 322 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Pedal-operated dry single-disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 19.0 gpm · 71.9 L/min | 13.5 gpm · 51.0 L/min | +41% 6080 |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,100 lb · 2,767 kg | 8,411 lb · 3,815 kg | +38% 7800-Turbo (DT) |
| Wheelbase declared | 96.0 in · 2,438 mm | 93.3 in · 2,371 mm | — |
| Length declared | 149.8 in · 3,805 mm | 157.1 in · 3,990 mm | — |
| Width declared | 73.1 in · 1,857 mm | 81.5 in · 2,070 mm | +11% 7800-Turbo (DT) |
| Height, over the cab declared | 103.2 in · 2,621 mm | 108.7 in · 2,760 mm | +5% 7800-Turbo (DT) |
| Ground clearance declared | 21.1 in · 536 mm | 13.1 in · 332 mm | +61% 6080 |
| Turning radius, braked declared | 11.9 ft · 3.63 m | — | — |
| Fuel tank declared | 127.9 qt · 121.0 L | 156.4 qt · 148.0 L | +22% 7800-Turbo (DT) |
DEUTZ-ALLIS 6080 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 6080”
Landini 7800-Turbo (DT) sources
Source
- Source: Traktorenlexikon, “Landini 7800 DT Turbo”