DEUTZ-ALLIS 6070 vs Massey Ferguson MF 6110 (A)

9 material differences · fewer than 12

Tractor one

1985–1988

No measured PTO figure

Tractor two

1995–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 6070 and the MF 6110 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 3 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 6070 and Massey Ferguson MF 6110 (A), field by field
Field	6070	MF 6110 (A)	Gap
Engine
Engine power, claimed claimed	70.0 hp	70.1 hp	—
Engine declared	ALLIS-CHALMERS 433 T	Perkins A 4.236	differs
Displacement declared	3.29 L	3.87 L	+18% MF 6110 (A)
Maximum torque declared	—	203 lb·ft · 275 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Pedal operated dry air-cooled VALEO single disc clutch as driving clutch	—
Hydraulics & hitch
Pump flow declared	—	13.6 gpm · 51.5 L/min	—
Pressure declared	—	2,727 psi · 188 bar	—
Three-point lift at ends declared	—	7,385 lb · 3,350 kg	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,100 lb · 2,767 kg	7,926 lb · 3,595 kg	+30% MF 6110 (A)
Wheelbase declared	93.0 in · 2,362 mm	93.3 in · 2,371 mm	—
Length declared	146.5 in · 3,721 mm	158.2 in · 4,019 mm	+8% MF 6110 (A)
Width declared	68.5 in · 1,740 mm	72.8 in · 1,850 mm	+6% MF 6110 (A)
Height declared	103.2 in · 2,621 mm	104.5 in · 2,654 mm	—
Ground clearance declared	20.4 in · 518 mm	14.1 in · 357 mm	+45% 6070
Turning radius, braked declared	10.4 ft · 3.17 m	—	—
Fuel tank declared	127.9 qt · 121.0 L	137.4 qt · 130.0 L	+7% MF 6110 (A)

Source

Source