DEUTZ-ALLIS 6060 vs URSUS 4514
8 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (27%); the drive differs (Two-wheel or four-wheel drive; 4WD). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 6060 | 4514 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 64.1 hp | 64 hp | — |
| Engine declared | ALLIS-CHALMERS 433 T | Ursus 4390 | differs |
| Displacement declared | 3.29 L | 3.87 L | +18% 4514 |
| Maximum torque declared | — | 184 lb·ft · 250 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 21.7 mph · 35 km/h | +40% 4514 |
| Clutch declared | — | Dual clutch | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Constant flow | — |
| Pump flow declared | — | 8.9 gpm · 33.8 L/min | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,699 lb · 2,585 kg | 7,231 lb · 3,280 kg | +27% 4514 |
| Wheelbase declared | 93.0 in · 2,362 mm | 90.6 in · 2,300 mm | — |
| Length declared | 146.5 in · 3,721 mm | 154.9 in · 3,935 mm | +6% 4514 |
| Width declared | 68.5 in · 1,740 mm | 78.3 in · 1,990 mm | +14% 4514 |
| Height declared | 103.2 in · 2,621 mm | 99.2 in · 2,520 mm | — |
| Ground clearance declared | 20.4 in · 518 mm | — | — |
| Turning radius, braked declared | 11.0 ft · 3.34 m | — | — |
| Fuel tank declared | 127.9 qt · 121.0 L | 84.5 qt · 80 L | +51% 6060 |
DEUTZ-ALLIS 6060 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 6060”
URSUS 4514 sources
Source
- Source: Traktorenlexikon, “Ursus 4514”