David Brown 995 or Deutz (KHD) D 6005?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level. On features, the David Brown 995 is ahead on forward gears; the Deutz D 6005 is ahead on drive.

  • The Deutz D 6005 suits heavy draft work (ploughing, cultivating) better on this data: four-wheel drive.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for David Brown 995 and Deutz (KHD) D 6005, with the call on each
Question995D 6005Call
Which puts more power through the PTO shaft?38.7 kW (51.9 hp)Traktorenlexikon, “David Brown 995”38.9 kW (52.2 hp)Traktorenlexikon, “Deutz D 6005”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 995 and the D 6005.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 995 and the D 6005.
Which pumps more oil for implements?28.2 L/min (7.4 gpm)Traktorenlexikon, “David Brown 995”—No figureNo call on hydraulic flow: no figure on record for the D 6005.
Which lifts more on the three-point hitch?—1,900 kg (4,189 lb)Traktorenlexikon, “Deutz D 6005”No figureNo call on three-point lift: no figure on record for the 995.
Which is heavier, for traction?2,610 kg (5,754 lb)Traktorenlexikon, “David Brown 995”2,605 kg (5,743 lb)Traktorenlexikon, “Deutz D 6005”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?—5,000 kg (11,023 lb)Traktorenlexikon, “Deutz D 6005”No figureNo call on maximum permissible mass: no figure on record for the 995.
Which has the wider choice of gears?12Traktorenlexikon, “David Brown 995”9Traktorenlexikon, “Deutz D 6005”AheadThe David Brown 995 has 33% more forward gears (3 gears) than the Deutz D 6005 (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 995 and the D 6005.
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “David Brown 995”20 km/h (12.4 mph) to 27 km/h (16.8 mph)Traktorenlexikon, “Deutz D 6005”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “David Brown 995”540 rpmTraktorenlexikon, “Deutz D 6005”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “Deutz D 6005”No figureNo call on PTO independence: not stated for the 995.
Which drives on both axles?2WDTraktorenlexikon, “David Brown 995”Two-wheel or four-wheel driveTraktorenlexikon, “Deutz D 6005”AheadThe Deutz D 6005 is available with four-wheel drive; the David Brown 995 is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1971–19761966–1967Ahead (a fact, not an advantage)The David Brown 995 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The David Brown 995 has 33% more forward gears (3 gears) than the Deutz D 6005 (both forward gears, as stated by the source).
  • The Deutz D 6005 is available with four-wheel drive; the David Brown 995 is two-wheel drive (as stated by the sources).
  • The David Brown 995 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540 rpm).
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources