David Brown 950 (Implematic) or J.I. Case 411-B?

Which should you choose?

On performance, every comparable figure that differs favours the David Brown 950 (Implematic): hydraulic flow. It is also ahead on PTO speeds.

  • The David Brown 950 (Implematic) suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
  • The David Brown 950 (Implematic) suits loader and hydraulic implement work better on this data: 146% (16.6 L/min / 4.4 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for David Brown 950 (Implematic) and J.I. Case 411-B, with the call on each
Question950 (Implematic)411-BCall
Which puts more power through the PTO shaft?27.4 kW (36.7 hp)Traktorenlexikon, “David Brown 950”27.3 kW (36.61 hp)Traktorenlexikon, “Case 411-B”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 950 (Implematic) and the 411-B.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 950 (Implematic) and the 411-B.
Which pumps more oil for implements?28.0 L/min (7.4 gpm)Traktorenlexikon, “David Brown 950”11.4 L/min (3.0 gpm)Traktorenlexikon, “Case 411-B”AheadThe David Brown 950 (Implematic) has 146% more hydraulic flow (16.6 L/min / 4.4 gpm) than the J.I. Case 411-B (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?817 kg (1,801 lb)Traktorenlexikon, “David Brown 950”No figureNo call on three-point lift: no figure on record for the 411-B.
Which is heavier, for traction?1,900 kg (4,189 lb)Traktorenlexikon, “David Brown 950”1,973 kg (4,350 lb)Traktorenlexikon, “Case 411-B”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 950 (Implematic) and the 411-B.
Which has the wider choice of gears?6Traktorenlexikon, “David Brown 950”4 to 8Traktorenlexikon, “Case 411-B”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 950 (Implematic) and the 411-B.
Which is faster on the road?20 km/h (12.4 mph)Traktorenlexikon, “David Brown 950”20 km/h (12.4 mph)Traktorenlexikon, “Case 411-B”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “David Brown 950”540 rpmTraktorenlexikon, “Case 411-B”AheadThe David Brown 950 (Implematic) offers 1000 rpm at the PTO, which the J.I. Case 411-B does not (as stated by the sources).
Which PTO runs independently of the ground drive?dependent (stops with the clutch)Traktorenlexikon, “Case 411-B”No figureNo call on PTO independence: not stated for the 950 (Implematic).
Which drives on both axles?2WDTraktorenlexikon, “David Brown 950”2WDTraktorenlexikon, “Case 411-B”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1958–19621958–1960EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The David Brown 950 (Implematic) has 146% more hydraulic flow (16.6 L/min / 4.4 gpm) than the J.I. Case 411-B (both pump flow, as stated by the source).
  • The David Brown 950 (Implematic) offers 1000 rpm at the PTO, which the J.I. Case 411-B does not (as stated by the sources).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on drive: all two-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources