David Brown 1412 or Steyr 8100 (a)?
Which should you choose?
On performance, every comparable figure that differs favours the Steyr 8100 (a): three-point lift. It is also ahead on drive.
- The Steyr 8100 (a) suits loader and hydraulic implement work better on this data: 12% (433 kg / 955 lb) more three-point lift.
- The Steyr 8100 (a) suits heavy draft work (ploughing, cultivating) better on this data: four-wheel drive.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 1412 | 8100 (a) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 56.9 kW (76.2 hp)Traktorenlexikon, “David Brown 1412” | 56.9 kW (76.3 hp)Traktorenlexikon, “Steyr 8100” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 1412 and the 8100 (a). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 1412 and the 8100 (a). |
| Which pumps more oil for implements? | — | 35.5 L/min (9.4 gpm)Traktorenlexikon, “Steyr 8100” | No figureNo call on hydraulic flow: no figure on record for the 1412. |
| Which lifts more on the three-point hitch? | 3,630 kg (8,003 lb)Traktorenlexikon, “David Brown 1412” | 4,063 kg (8,957 lb)Traktorenlexikon, “Steyr 8100” | AheadThe Steyr 8100 (a) has 12% more lift (433 kg / 955 lb) than the David Brown 1412 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 3,356 kg (7,399 lb)Traktorenlexikon, “David Brown 1412” | 3,672 kg (8,095 lb)Traktorenlexikon, “Steyr 8100” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 1412 and the 8100 (a). |
| Which has the wider choice of gears? | — | 12 to 20Traktorenlexikon, “Steyr 8100” | No figureNo call on forward gears: no figure on record for the 1412. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 1412 and the 8100 (a). |
| Which is faster on the road? | 25 km/h (15.5 mph)Traktorenlexikon, “David Brown 1412” | 25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Steyr 8100” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “David Brown 1412” | 540/1000 rpmTraktorenlexikon, “Steyr 8100” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Steyr 8100” | No figureNo call on PTO independence: not stated for the 1412. |
| Which drives on both axles? | 2WDTraktorenlexikon, “David Brown 1412” | 2WD / 4WDTraktorenlexikon, “Steyr 8100” | AheadThe Steyr 8100 (a) is available with four-wheel drive; the David Brown 1412 is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1974–1980 | 1978–1984 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Steyr 8100 (a) has 12% more lift (433 kg / 955 lb) than the David Brown 1412 (both lift at the hitch ends, as stated by the source).
- The Steyr 8100 (a) is available with four-wheel drive; the David Brown 1412 is two-wheel drive (as stated by the sources).
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, forward gears, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources