David Brown 1194 or VALMET 205/205-4?
Which should you choose?
On performance, every comparable figure that differs favours the VALMET 205/205-4: hydraulic flow. It is also ahead on drive. On features, the David Brown 1194 is ahead on forward gears.
- The VALMET 205/205-4 suits loader and hydraulic implement work better on this data: 47% (12.5 L/min / 3.3 gpm) more hydraulic flow.
- The VALMET 205/205-4 suits heavy draft work (ploughing, cultivating) better on this data: 28% (600 kg / 1,323 lb) heavier and four-wheel drive.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 1194 | 205/205-4 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 28.8 kW (38.6 hp)Traktorenlexikon, “David Brown 1194” | 29.0 kW (38.9 hp)Traktorenlexikon, “Valmet 205” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 1194 and the 205/205-4. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 1194 and the 205/205-4. |
| Which pumps more oil for implements? | 26.5 L/min (7.0 gpm)Traktorenlexikon, “David Brown 1194” | 39.0 L/min (10.3 gpm)Traktorenlexikon, “Valmet 205” | AheadThe VALMET 205/205-4 has 47% more hydraulic flow (12.5 L/min / 3.3 gpm) than the David Brown 1194 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 990 kg (2,183 lb)Traktorenlexikon, “David Brown 1194” | 2,500 kg (5,512 lb)Traktorenlexikon, “Valmet 205” | Not comparableNot comparable on three-point lift: the 1194: lift through the full range 610 mm behind the ends, as stated by the source (Traktorenlexikon, “David Brown 1194”); the 205/205-4: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Valmet 205”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 2,110 kg (4,652 lb)Traktorenlexikon, “David Brown 1194” | 2,710 kg (5,975 lb)Traktorenlexikon, “Valmet 205” | Ahead (a fact, not an advantage)The VALMET 205/205-4 is 28% heavier (600 kg / 1,323 lb) than the David Brown 1194 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 1194 and the 205/205-4. |
| Which has the wider choice of gears? | 12Traktorenlexikon, “David Brown 1194” | 8Traktorenlexikon, “Valmet 205” | AheadThe David Brown 1194 has 50% more forward gears (4 gears) than the VALMET 205/205-4 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 1194 and the 205/205-4. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “David Brown 1194” | 30 km/h (18.6 mph)Traktorenlexikon, “Valmet 205” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “David Brown 1194” | 540 rpmTraktorenlexikon, “Valmet 205” | EvenEven on PTO speeds: the same speeds (540 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Valmet 205” | No figureNo call on PTO independence: not stated for the 1194. |
| Which drives on both axles? | 2WDTraktorenlexikon, “David Brown 1194” | 2WD / 4WDTraktorenlexikon, “Valmet 205” | AheadThe VALMET 205/205-4 is available with four-wheel drive; the David Brown 1194 is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1984–1985 | 1989–1991 | Ahead (a fact, not an advantage)The VALMET 205/205-4 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The VALMET 205/205-4 has 47% more hydraulic flow (12.5 L/min / 3.3 gpm) than the David Brown 1194 (both pump flow, as stated by the source).
- The VALMET 205/205-4 is 28% heavier (600 kg / 1,323 lb) than the David Brown 1194 (both unladen weight, as stated by the source).
- The David Brown 1194 has 50% more forward gears (4 gears) than the VALMET 205/205-4 (both forward gears, as stated by the source).
- The VALMET 205/205-4 is available with four-wheel drive; the David Brown 1194 is two-wheel drive (as stated by the sources).
- The VALMET 205/205-4 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (540 rpm).
- Not comparable on three-point lift: the 1194: lift through the full range 610 mm behind the ends, as stated by the source (Traktorenlexikon, “David Brown 1194”); the 205/205-4: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Valmet 205”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources