David Brown 1190 or J.I. Case 1194?
Which should you choose?
On performance, every comparable figure that differs favours the David Brown 1190: hydraulic flow. On features, the J.I. Case 1194 is ahead on top speed.
- The David Brown 1190 suits loader and hydraulic implement work better on this data: 11% (2.9 L/min / 0.8 gpm) more hydraulic flow.
- The J.I. Case 1194 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 1190 | 1194 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 28.8 kW (38.6 hp)Traktorenlexikon, “David Brown 1190” | 28.8 kW (38.6 hp)Traktorenlexikon, “Case 1194” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 1190 and the 1194. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 1190 and the 1194. |
| Which pumps more oil for implements? | 29.4 L/min (7.8 gpm)Traktorenlexikon, “David Brown 1190” | 26.5 L/min (7.0 gpm)Traktorenlexikon, “Case 1194” | AheadThe David Brown 1190 has 11% more hydraulic flow (2.9 L/min / 0.8 gpm) than the J.I. Case 1194 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | — | 990 kg (2,183 lb)Traktorenlexikon, “Case 1194” | No figureNo call on three-point lift: no figure on record for the 1190. |
| Which is heavier, for traction? | 2,096 kg (4,621 lb)Traktorenlexikon, “David Brown 1190” | 2,110 kg (4,652 lb)Traktorenlexikon, “Case 1194” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 1190 and the 1194. |
| Which has the wider choice of gears? | 12Traktorenlexikon, “David Brown 1190” | 12Traktorenlexikon, “Case 1194” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 1190 and the 1194. |
| Which is faster on the road? | 25 km/h (15.5 mph)Traktorenlexikon, “David Brown 1190” | 30 km/h (18.6 mph)Traktorenlexikon, “Case 1194” | AheadThe J.I. Case 1194 has 20% more top speed (5.0 km/h / 3.1 mph) than the David Brown 1190 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “David Brown 1190” | 540 rpmTraktorenlexikon, “Case 1194” | EvenEven on PTO speeds: the same speeds (540 rpm). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the 1190 and the 1194. |
| Which drives on both axles? | 2WDTraktorenlexikon, “David Brown 1190” | 2WDTraktorenlexikon, “Case 1194” | EvenEven on drive: all two-wheel drive. |
| Which is newer, and what about parts? | 1980–1984 | 1984–1985 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The David Brown 1190 has 11% more hydraulic flow (2.9 L/min / 0.8 gpm) than the J.I. Case 1194 (both pump flow, as stated by the source).
- The J.I. Case 1194 has 20% more top speed (5.0 km/h / 3.1 mph) than the David Brown 1190 (both top speed forward, as stated by the source).
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on PTO speeds: the same speeds (540 rpm).
- Even on drive: all two-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources