5 material differences · fewer than 12
Tractor oneClaas Ares 697 ATZ2005–2007No measured PTO figureTractor twoFendt 415 Vario2006–2013No measured PTO figure
Which should you choose?
Read our verdict on the Ares 697 ATZ and the 415 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Ares 697 ATZ | 415 Vario | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 138 hp | 138 hp | — |
| Engine declared | — | Deutz TCD 2012 L4-4V | — |
| Displacement declared | — | 4.04 L | — |
| Maximum torque declared | 436 lb·ft · 591 N·m | 481 lb·ft · 652 N·m | +10% 415 Vario |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | — | Turbo clutch function, driving clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | — | Load sensing | — |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/540E/750/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 12,412 lb · 5,630 kg | 12,015 lb · 5,450 kg | — |
| Maximum permissible mass declared | 20,393 lb · 9,250 kg | — | — |
| Wheelbase declared | 111.0 in · 2,820 mm | 95.2 in · 2,417 mm | +17% Ares 697 ATZ |
| Length declared | 203.1 in · 5,160 mm | 168.5 in · 4,281 mm | +21% Ares 697 ATZ |
| Width declared | 100.4 in · 2,550 mm | 98.0 in · 2,490 mm | — |
| Ground clearance declared | — | 20.2 in · 512 mm | — |
| Fuel tank declared | 264.2 qt · 250 L | 258.9 qt · 245 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Claas Ares 697 ATZ sources
- Source: Traktorenlexikon, “Claas Ares 697 ATZ”
- Source: OECD test report 2295, 2005
Fendt 415 Vario sources
- Source: Traktorenlexikon, “Fendt 415 Vario”
- Source: Traktorenlexikon, “Fendt 411 Vario”