6 material differences · fewer than 12
Tractor oneClaas Ares 5672005–2007No measured PTO figureTractor twoFendt Favorit 711 Variofrom 1999No measured PTO figure
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (2005–2007; 1999–1999). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
6 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Ares 567 | Favorit 711 Vario | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 114 hp | 113.7 hp | — |
| Engine declared | — | Deutz BF6M 2013 C | — |
| Displacement declared | — | 5.70 L | — |
| Maximum torque declared | 293 lb·ft · 397.1 N·m | — | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 31.1 mph · 50 km/h | +25% Favorit 711 Vario |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | — | 29.1 gpm · 110.0 L/min | — |
| Pressure declared | 2,901 psi · 200 bar | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 750 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,626 lb · 4,820 kg | 12,456–13,603 lb · 5,650–6,170 kg | differs |
| Maximum permissible mass declared | 17,637 lb · 8,000 kg | 20,944 lb · 9,500 kg | +19% Favorit 711 Vario |
| Wheelbase declared | 100.9 in · 2,564 mm | 106.3 in · 2,700 mm | +5% Favorit 711 Vario |
| Length declared | 185.8 in · 4,720 mm | 181.7–182.7 in · 4,615–4,640 mm | — |
| Width declared | — | 94.1–95.6 in · 2,390–2,429 mm | — |
| Ground clearance declared | — | 20.8 in · 528 mm | — |
| Turning radius, braked declared | — | 16.1 ft · 4.90 m | — |
| Fuel tank declared | 190.2 qt · 180 L | 317.0 qt · 300 L | +67% Favorit 711 Vario |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Claas Ares 567 sources
- Source: Traktorenlexikon, “Claas Ares 567 ATZ”
- Source: OECD test report 2286, 2005
Fendt Favorit 711 Vario sources
- Source: Traktorenlexikon, “Fendt Favorit 711 Vario”
- Source: Traktorenlexikon, “Fendt Favorit 714 Vario”